LG LMX28988SB Owner's Manual

To change the water filter, locate the filter compartment inside the refrigerator, twist the old filter counterclockwise to remove it, insert the new filter, and twist it clockwise until it locks in place. Run water through the dispenser for 2-3 minutes to clear air and impurities.
Ensure the vents inside the fridge are not blocked, check the temperature settings, and clean the condenser coils. If the issue persists, consider contacting a technician for further inspection.
Locate the on/off switch on the ice maker. Turn it off for a few seconds, then turn it back on. If necessary, press the reset button or unplug the refrigerator for a few minutes before restarting.
It is recommended to clean the condenser coils every 6-12 months. Use a vacuum cleaner or a soft brush to remove dust and debris from the coils, which are located at the back or bottom of the refrigerator.
To adjust the temperature, locate the control panel inside the refrigerator, then use the buttons to set the desired temperature for both the fridge and freezer compartments.
Water pooling can be due to a clogged defrost drain. To fix it, locate the drain hole, usually found at the back of the fridge, and clear any obstruction with warm water or a cleaning solution.
Ensure the refrigerator is level, check for loose parts, and ensure it is not touching the wall or cabinets. Some noise is normal, but persistent or loud noises should be checked by a professional.
Try resetting the refrigerator by unplugging it for a few minutes and then plugging it back in. If the problem persists, the control panel may require professional service.
Ensure that air can circulate around the items by not overloading the shelves. Store raw meat on the bottom shelf to prevent contamination and use airtight containers for perishables.
The LG LMX28988SB is designed for indoor use in a climate-controlled environment. Extreme temperatures can affect its performance, so it is not recommended for use in garages.