LG LMX25986ST Owner's Manual
![LG LMX25986ST Refrigerator manual cover](/images/KhrPtvrFWjcBXDgCQJczMofc/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, twist the old filter counterclockwise to remove it, and insert the new filter by twisting it clockwise until it is secure. Run water through the dispenser for 2 minutes to purge air and contaminants.
Ensure that the refrigerator is plugged in and the temperature settings are correct. Check if the vents are blocked by food items. Clean the condenser coils and make sure the doors are sealing properly. If the problem persists, contact LG customer support.
To reset the ice maker, locate the on/off switch or button, turn it off for a few seconds, and then turn it back on. You may also need to remove and reinstall the ice bin. Consult the user manual for specific instructions.
Loud noises can be caused by the refrigerator not being level, items inside vibrating, or the compressor working harder to cool. Ensure the refrigerator is level, rearrange items inside, and check if the noises persist. If they do, it may require service.
Regularly clean the condenser coils, check and replace the water filter every 6 months, ensure door seals are intact, and periodically clean the interior with mild detergent. Also, defrost the freezer if ice buildup is excessive.
Use the control panel located inside the refrigerator. Press the 'Refrigerator' or 'Freezer' button to cycle through the preset temperatures. Adjust until the desired temperature is displayed. Allow 24 hours for the temperature to stabilize.
Check that the water supply line is connected and the water valve is open. Inspect the water filter to ensure it is properly installed and not clogged. If the issue persists, it may require professional service.
Regularly clean the interior and use baking soda or a charcoal filter to absorb odors. Ensure food is covered or sealed, and periodically check for and discard expired items.
Frost buildup can occur if the freezer door is left open or not sealing properly. Check the door gasket for damage and ensure the door is fully closed. Avoid placing hot or warm items in the freezer.
Press the 'Energy Saver' button on the control panel. This mode reduces energy usage by optimizing cooling cycles. Ensure the doors are closed properly to maximize energy efficiency.