LG LMX25981SB Owner's Manual

To adjust the temperature settings, locate the control panel on the front of the refrigerator. Press the 'Refrigerator' or 'Freezer' button to cycle through the temperature options. Once you reach the desired temperature, it will set automatically after a few seconds.
If your refrigerator is making a loud noise, it could be due to the condenser fan or the evaporator fan being obstructed. Check for any blockages and ensure that the fans are clean and unobstructed. If the noise persists, contact a professional technician for assistance.
To replace the water filter, locate the filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it is secure. Run water through the dispenser for a few minutes to purge any air from the system.
First, ensure that the ice maker is turned on and the water supply is connected. Check for any ice blockages in the ice maker or the dispenser chute. If the issue persists, inspect the water inlet valve for any malfunctions or contact a technician for further troubleshooting.
It is recommended to clean the condenser coils every 6 to 12 months to ensure optimal performance. Use a vacuum cleaner or a coil cleaning brush to remove dust and debris from the coils.
Water pooling can be caused by a blocked defrost drain. Check the drain located at the back of the refrigerator to ensure it is not clogged. Clear any debris and flush the drain with warm water to resolve the issue.
To reset the control panel, unplug the refrigerator from the power outlet for about 5 minutes. Plug it back in and allow the system to restart. This should reset the control panel.
To maintain freshness, store raw meat in the coldest part of the refrigerator, typically the bottom shelf. Utilize the crisper drawers for fruits and vegetables, and keep dairy products near the top where the temperature is more consistent.
To activate the energy-saving mode, press the 'Energy Saver' button on the control panel. This mode reduces energy consumption by adjusting the cooling cycles and is ideal for times when the refrigerator doors are not frequently opened.
In the event of a power outage, keep the refrigerator doors closed to maintain the internal temperature. Once power is restored, check the control panel for any error messages. If the refrigerator does not resume normal operation, unplug it for a few minutes before plugging it back in to reset the system.