LG LMX25964ST Owner's Manual
![LG LMX25964ST Refrigerator manual cover](/images/tGtwFppullIqGYmEZZNebKzQ/thumbs/thumb175x175.webp)
To reset the water filter indicator, press and hold the 'Filter Reset' button for 3-5 seconds until the indicator light turns off.
First, ensure that the refrigerator is plugged in and the temperature settings are correct. Check if the vents are blocked and clean the condenser coils. If the problem persists, contact LG customer support.
Check if the ice maker is turned on and the water line is connected properly. Make sure the freezer is cold enough and the ice maker's arm is in the down position. If issues continue, consult the user manual for further troubleshooting steps.
It's recommended to clean the condenser coils every 6 to 12 months to ensure optimal performance and efficiency.
Use the control panel on the refrigerator to adjust the temperature. Press the 'Refrigerator' or 'Freezer' button to cycle through the temperature settings until you reach the desired level.
Leakage could be due to a clogged defrost drain, a faulty water filter, or an improper connection of the water line. Check these areas and replace or repair them as necessary.
Locate the water filter compartment, usually at the bottom left of the refrigerator. Twist the old filter counterclockwise and remove it. Insert the new filter by twisting it clockwise until it locks into place.
Error codes can indicate specific issues, such as a problem with the compressor or temperature sensor. Refer to the user manual for a detailed explanation of each code and recommended actions.
Ensure the refrigerator is placed away from heat sources and direct sunlight, keep the door seals clean and intact, and set the temperature to the manufacturer’s recommendations. Regular maintenance can also help improve efficiency.
No, the LG LMX25964ST refrigerator is not designed with reversible door hinges, so the door swing direction cannot be changed.