LG LMX21981ST Owner's Manual

To adjust the temperature, locate the control panel on the front of the refrigerator. Use the 'Refrigerator' and 'Freezer' buttons to set your desired temperature. Wait 24 hours for the refrigerator to stabilize at the new settings.
First, check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure the doors are closing properly and the vents inside the fridge are not blocked. If the issue persists, refer to the user manual or contact LG customer support.
To replace the water filter, turn off the water supply and locate the filter inside the refrigerator. Twist the old filter counterclockwise to remove it, and insert the new filter by twisting it clockwise. Turn the water supply back on and run water through the dispenser to clear any air.
It is recommended to clean the condenser coils at least twice a year. This helps maintain efficiency and prolongs the life of the refrigerator. Use a vacuum cleaner or a soft brush to remove dust and debris from the coils.
Ensure the ice maker is turned on and the water supply line is properly connected. Check for any ice blockages or kinks in the line. If the problem persists, resetting the ice maker or consulting the user manual may help.
To reset the refrigerator, unplug it from the power outlet, wait about 5 minutes, and then plug it back in. This can help resolve minor technical issues.
Water pooling can be caused by a blocked defrost drain. Check the drain for any obstructions and clear it if necessary. It might also be helpful to clean the drain using a mixture of warm water and baking soda.
To improve energy efficiency, keep the refrigerator and freezer doors closed as much as possible. Ensure that the seals are tight and not damaged. Keep the refrigerator moderately full to help maintain temperature.
Store raw meats on the bottom shelf to prevent drips onto other foods. Use airtight containers for leftovers and ensure that perishable items are kept at appropriate temperatures. Avoid overcrowding to allow proper air circulation.
To deactivate the child lock, press and hold the 'Child Lock' button on the control panel for about 3 seconds until the lock indicator light turns off. This will unlock the control panel and allow for normal operation.