LG LFXS29626B Owner's Manual
![LG LFXS29626B Refrigerator manual cover](/images/elvOJFoZfNdjRlYwdxrlILPH/thumbs/thumb175x175.webp)
To reset the water filter indicator, press and hold the 'Filter Reset' button for 3 seconds. The indicator light will turn off, indicating the reset is complete.
Ensure the doors are sealing properly and that the vents inside the refrigerator are not blocked. Additionally, check the temperature settings and make sure they are set to the recommended levels. If issues persist, contact LG customer service for further assistance.
It is recommended to clean the condenser coils every 6 months to ensure optimal performance and energy efficiency. Use a vacuum or a brush to gently clean the coils.
Excessive frost can occur if the freezer door is not sealing properly or if it is opened frequently. Check the door gasket for any damage and ensure it seals tightly. Minimize the frequency of door openings to maintain temperature stability.
To change the internal light bulb, unplug the refrigerator, remove the light cover by unscrewing it, and replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Check if the refrigerator is level and ensure it is on a stable surface. Noises can also occur if the refrigerator is touching the wall or other objects. If the noise persists, inspect the fan and compressor for any issues.
Press the 'Energy Saver' button to activate or deactivate the energy-saving mode. This feature helps reduce energy consumption when enabled.
Check if the water filter is installed correctly and not clogged. Inspect the water supply lines for any leaks or damage. Also, ensure the defrost drain is not blocked.
To adjust the temperature settings, use the control panel on the front of the refrigerator. Press the 'Refrigerator' or 'Freezer' button to change the temperature. Allow 24 hours for the temperature to stabilize.
Remove all food items and shelves. Use a mixture of mild detergent and warm water to wipe down the interior surfaces. Avoid using abrasive cleaners. Dry thoroughly before replacing shelves and food items.