LG LFXC22596S Owner's Manual
![LG LFXC22596S Refrigerator manual cover](/images/mcARIgfcilYMVYZGBpSaxpZy/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, turn the old filter counterclockwise to remove it, and then install the new filter by rotating it clockwise until it is secure. Make sure to flush the new filter with water to remove any air or impurities.
First, ensure that the refrigerator is plugged in and the temperature settings are correct. Check for any obstructions blocking air vents and ensure the door seals are clean and intact. If the issue persists, consider contacting LG customer service for further assistance.
To clean the condenser coils, unplug the refrigerator and locate the coils at the back or underneath the unit. Use a vacuum cleaner with a brush attachment to remove dust and debris. Regular cleaning can help maintain efficient cooling performance.
Yes, to reset the ice maker, locate the reset button on the ice maker unit. Press and hold the button until you hear a chime or see a movement in the ice maker. This should reset the unit and resolve minor issues.
Unusual noises can be caused by several factors, such as a vibrating compressor, ice maker operation, or refrigerant flow. Ensure the refrigerator is level and the rear panel is tightly secured. If noises persist, consult the user manual or contact LG support.
Download the LG SmartThinQ app on your smartphone. Open the app and select "Smart Diagnosis." Follow the instructions to place the phone's microphone near the refrigerator's Smart Diagnosis logo, then press and hold the "Freezer" button for a few seconds. The app will analyze and provide troubleshooting steps.
The recommended temperature setting for the refrigerator compartment is 37°F (3°C) and 0°F (-18°C) for the freezer compartment. Adjust the settings based on your usage and ambient temperature as needed.
To prevent frost build-up, ensure the freezer door is fully closed and the door seal is intact. Avoid overloading the freezer, which can restrict airflow. Regularly check and remove any ice build-up around the door seal.
If the LED light is not working, first check if the refrigerator is properly plugged in. If the issue persists, the LED module may need replacement. Refer to the user manual for instructions or contact a qualified technician for assistance.
To activate Sabbath mode, press and hold the "Freezer" and "Ice Plus" buttons simultaneously for five seconds. The display will show "Sb" indicating that Sabbath mode is enabled. To deactivate, repeat the same step.