LG LFXC22526S Owner's Manual
![LG LFXC22526S Refrigerator manual cover](/images/qqnulVjGypdDJbScZURNduzs/thumbs/thumb175x175.webp)
To change the water filter, locate it in the upper left corner of the refrigerator compartment. Twist the old filter counterclockwise to remove it. Insert the new filter and twist it clockwise until it is secure. Reset the filter indicator by pressing and holding the reset button for 3 seconds.
Ensure the refrigerator is plugged in and the power is on. Check the temperature settings and adjust if necessary. Make sure the vents inside the refrigerator are not blocked and that the door seals are clean and intact. If the problem persists, contact LG customer service for assistance.
Unplug the refrigerator and remove the grille at the bottom front if applicable. Use a vacuum cleaner with a brush attachment to gently clean the condenser coils. If necessary, use a coil brush to remove stubborn debris. Reattach the grille and plug the refrigerator back in.
Press the 'Freezer' button on the control panel until the desired temperature is displayed. The temperature can typically be adjusted between -6°F and 8°F (-21°C to -13°C).
Check if the ice maker is turned on and that the water supply is connected. Make sure the freezer temperature is set correctly. Inspect the ice maker for any visible obstructions or ice jams. If the issue persists, consult the user manual or contact LG support.
This model is frost-free, so it doesn't require manual defrosting. However, you should clean the refrigerator regularly to prevent frost buildup on the interior surfaces.
No, the doors on this model are not reversible. Be sure to consider the door swing when installing the refrigerator in your kitchen layout.
Keep items away from the vents to ensure proper airflow. Store raw meats on the bottom shelf to prevent drips onto other foods. Use the door compartments for condiments and frequently used items. Adjust shelves as needed to accommodate larger items.
If the control panel is unresponsive after a power outage, unplug the refrigerator for 30 seconds and then plug it back in. This should reset the control panel. If problems persist, consult the user manual or contact LG support.
Regularly clean the interior and exterior surfaces. Vacuum the condenser coils twice a year. Check and replace the water filter every six months. Ensure the door seals are clean and free from cracks. Monitor the temperature settings and adjust as needed.