LG LDS5560ST LDS5560ST.ASTEEUS Owner's Manual

To reset your LG LDS5560ST dishwasher, press and hold the 'Start' button for about 3 seconds until the display clears or the unit beeps. This will reset the control panel.
Ensure that the drain hose is not kinked or clogged. Check the filter and clean any debris. Make sure the garbage disposal, if connected, is clear.
Remove the lower rack to access the filter. Twist and remove the cylindrical filter, then rinse it under running water. Remove any debris and reinstall it by twisting it back into place securely.
Ensure the spray arms are not obstructed and can spin freely. Verify that the detergent is being dispensed correctly and that the water temperature is at least 120°F for optimal cleaning.
The 'OE' error code indicates a draining issue. Check the drain hose, filter, and ensure the sink’s air gap is clear.
It is recommended to clean the filter every month to prevent clogs and maintain optimal performance.
Use a high-quality automatic dishwasher detergent. Avoid using hand dishwashing detergent, as it may cause excessive suds.
Check the door gasket for signs of damage, ensure the door is closing properly, and verify that the dishwasher is level. Inspect the hoses and connections for leaks.
Yes, using a rinse aid will help improve drying performance and reduce water spots on dishes. Fill the rinse aid dispenser as needed.
Ensure that dishes are loaded correctly and not obstructing the spray arms. Inspect the dishwasher for any loose parts or debris that could cause noise.