LG LDP7708BD LDP7708BD.ABDESNA Owner's Manual

To start a wash cycle, load your dishes, add detergent, close the door, select the desired cycle using the control panel, and press the Start button. Ensure the door is securely shut to begin the wash.
Check for blockages in the drain hose, ensure the filter is clean, and make sure the garbage disposal is clear if connected. If the issue persists, inspect the air gap for obstructions or consult the user manual for further troubleshooting steps.
Remove the lower rack to access the filter at the bottom of the dishwasher. Turn the filter counterclockwise to remove it. Rinse it under running water to remove debris, and use a soft brush if necessary. Reinstall by placing it back and turning it clockwise.
Place larger items like pots and pans on the lower rack and smaller items like glasses and cups on the top rack. Ensure items do not block the spray arms and that they are tilted for proper drainage. Avoid overloading to allow water to circulate freely.
Refer to the user manual to identify the specific error code. Most codes indicate a problem such as water supply issues or door latch problems. Follow the recommended troubleshooting steps or contact LG customer support if necessary.
It is recommended to clean the interior once a month. Use a damp cloth to wipe down the door seals and the interior walls. Run an empty cycle with a dishwasher cleaner or white vinegar for a more thorough cleaning.
Use only detergents designed specifically for automatic dishwashers. Avoid using regular dish soap as it can cause excessive suds. For best results, use high-quality dishwasher tablets or pods.
Open the rinse aid dispenser by turning the cap. Adjust the dial to the desired setting, typically between 1 and 4 depending on water hardness. Refill the dispenser with rinse aid and replace the cap securely.
Unusual noises can be caused by items obstructing the spray arms or dishes that are not securely placed. Ensure all items are properly loaded and that nothing is touching the spray arms. If the noise persists, check for foreign objects in the filter or pump.
To enhance drying, use rinse aid, select a cycle with a drying option, and open the door slightly after the cycle completes to allow steam to escape. Ensure plastic items are placed on the upper rack to avoid water pooling.