LG LDFN343LS LDFN343LS.ASSEEUS Owner's Manual

To reset your LG LDFN343LS dishwasher, press and hold the Start button for about 3 seconds until the display panel shows a change. This will cancel the current cycle and reset the dishwasher.
If your dishwasher is not draining, check for any blockages in the filter, drain hose, or air gap. Clean these parts thoroughly and ensure the drain hose is not kinked. If the problem persists, consult the user manual or contact customer support.
It is recommended to clean the filter every month to ensure optimal performance. Remove the lower rack, twist the filter cover counterclockwise, and lift it out to clean. Rinse under warm water and replace it securely.
Use high-quality, automatic dishwasher detergents for best results. Avoid using hand-washing detergents as they can cause excessive suds. Consider using rinse aids to enhance drying performance.
Grinding noises may indicate debris in the impeller area or a problem with the motor. Check and clean the filter and impeller area. If the noise continues, it may require professional inspection.
To improve drying performance, ensure you are using a rinse aid. Also, select higher temperature settings or use the Extra Dry option if available. Allow dishes to sit for a short period after the cycle ends for better air drying.
The LE error code indicates a motor error, often caused by overloading or a locked motor. Reduce the load, ensure the spray arms can rotate freely, and restart the dishwasher. If the error persists, contact customer support.
No, the dishwasher requires a water supply to operate properly. Running it without water can damage the appliance. Wait until the water supply is restored before using it.
To set a delayed wash, load your dishwasher, add detergent, and close the door. Press the Power button, select your desired cycle, then press the Delay Start button to set the delay time. Press Start to activate the delay.
Regular maintenance includes cleaning the filter monthly, wiping down the door seals to prevent mold, ensuring the spray arms are unobstructed, and using a dishwasher cleaner periodically to remove mineral deposits.