LG LDF6920B LDF6920BB.ABPEEUS Owner's Manual
![LG LDF6920B LDF6920BB.ABPEEUS Dishwasher manual cover](/images/ViZrEhsLQRYBXlhXaGVDFyjS/thumbs/thumb175x175.webp)
To reset your LG LDF6920B dishwasher, press and hold the power button for about 10 seconds until the unit powers off. Wait for a few minutes and then turn it back on. This should reset the control board.
If your LG dishwasher is not draining, check the filter and drain hose for clogs. Clean the filter and ensure the drain hose is not kinked. If the problem persists, the issue might be with the pump and may require service.
To clean the spray arms, remove them from the dishwasher and rinse them under running water to clear any blockages. Use a small brush or toothpick to dislodge any debris from the spray holes.
Unusual noises can be caused by items in the dishwasher rattling or the spray arm hitting something. Ensure all items are properly loaded and that the spray arm moves freely. Check for any loose or broken parts.
The "OE" error code indicates a drainage issue. Check the drain hose for blockages, ensure it is properly installed, and clean the dishwasher filter. If the error persists, contact LG support.
It is recommended to clean the filter once a month to ensure optimal performance and to prevent clogs. More frequent cleaning may be necessary if you use the dishwasher frequently.
Use a high-quality, dishwasher-specific detergent for best results. Avoid using regular dish soap as it can cause excessive suds and potentially damage the dishwasher.
To improve drying performance, use a rinse aid and ensure that the "Extra Dry" option is selected if available. Also, open the door slightly after the cycle ends to allow steam to escape.
Yes, you can use vinegar to clean your dishwasher. Simply place a cup of white vinegar in a dishwasher-safe container on the top rack and run a hot water cycle. This helps to remove buildup and odors.
If your dishwasher doesn't start, ensure the door is fully closed and latched. Check that the dishwasher is plugged in and that the circuit breaker is not tripped. Also, verify that the child lock is not activated.