LG 75UT770H0UA 75UT770H0UA.AUS Owner's Manual

To connect your LG 75UT770H0UA to Wi-Fi, press the 'Settings' button on your remote, navigate to 'Network', select 'Wi-Fi Connection', and choose your network from the list. Enter your Wi-Fi password when prompted.
If your LG TV screen is flickering, try updating the firmware, checking the HDMI connections, or adjusting the picture settings. If the issue persists, perform a factory reset or contact LG support.
To reset your LG TV to factory settings, press the 'Settings' button on your remote, go to 'All Settings', select 'General', and then 'Reset to Initial Settings'. Confirm your selection to proceed.
To enable HDMI-CEC, press 'Settings' on your remote, navigate to 'All Settings', select 'General', then 'Devices', and turn on 'HDMI-CEC'. This allows connected devices to control the TV.
Check if the TV is muted or if the volume is set too low. Ensure that external audio devices are properly connected. Also, go to 'Settings', 'All Settings', 'Sound', and verify the audio output is set correctly.
Yes, the LG 75UT770H0UA is wall-mountable. Ensure you use a VESA-compatible mounting bracket and follow the guidelines in the user manual for proper installation.
To update the software, press the 'Settings' button, go to 'All Settings', select 'General', then 'About This TV', and choose 'Check for Updates'. Follow the prompts to update the software.
For the best viewing experience, set the picture mode to 'Cinema' or 'Expert', adjust the backlight to your preference, and ensure 'TruMotion' is set to 'Off' for a more natural picture.
If the remote control is not working, replace the batteries, ensure there are no obstructions between the remote and TV, and try pairing the remote again using the instructions in the user manual.
Ensure the power cord is securely connected to the TV and wall outlet. Check the power outlet with another device to confirm it's working. If the TV still does not turn on, contact LG support.