LG 47LY750H 47LY750H.AUS Owner's Manual
![LG 47LY750H 47LY750H.AUS TV manual cover](/images/qyfmsScRCabPNJWIRxwrzPPa/thumbs/thumb175x175.webp)
To connect your LG 47LY750H TV to Wi-Fi, press the 'Home' button on your remote, go to 'Settings', select 'Network', then 'Wi-Fi Connection'. Choose your network from the list and enter the password if required.
If your LG 47LY750H TV does not turn on, ensure it is plugged into a working power outlet. Check the power cable for any damage. If the issue persists, try resetting the TV by unplugging it for 30 seconds and then plugging it back in.
To update the firmware, press the 'Home' button on your remote, select 'Settings', then 'All Settings'. Navigate to 'General' and select 'About This TV'. Choose 'Check for Updates' and follow the on-screen instructions if an update is available.
Ensure that the input source is set to a high-definition signal. Check the HDMI cables for any damage. You can also adjust picture settings by going to 'Settings', selecting 'Picture', and trying different modes or customizing the settings.
To enable subtitles, press the 'Home' button on your remote, select 'Settings', then 'Accessibility'. Choose 'Subtitles' and turn them on. You can also adjust the subtitle settings according to your preferences.
To clean the screen, turn off the TV and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen. Avoid using chemicals or water directly on the screen to prevent damage.
To improve sound quality, go to 'Settings', select 'Sound', and explore different sound modes. Consider connecting external speakers or a soundbar for enhanced audio performance.
Check if the TV is on mute. Ensure the volume is turned up. Verify that external speakers or headphones are not connected. If using HDMI, check audio settings for that input source.
To perform a factory reset, go to 'Settings', select 'All Settings', then 'General'. Choose 'Reset to Initial Settings' and follow the on-screen prompts to complete the reset.
Yes, your LG 47LY750H TV supports Bluetooth. To connect, go to 'Settings', select 'Sound', then 'Sound Out'. Choose 'Bluetooth' and follow the instructions to pair your device.