Kenwood KSBSB17 Instruction Manual
![Kenwood KSBSB17 manual cover](/images/ZCeLBixaxBOcEFuKKZcoPxsQ/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the fridge compartment. Use the temperature adjustment buttons to set your desired temperature for both the fridge and freezer sections.
First, check if the temperature settings are correct. Ensure the refrigerator is plugged in and the door seals are clean and intact. If the issue persists, consider defrosting the unit or contacting customer support for further assistance.
It is recommended to clean the condenser coils at least twice a year to maintain optimal performance and efficiency.
To defrost the freezer, remove all items and unplug the refrigerator. Leave the freezer door open to allow ice to melt naturally and use towels to absorb water. Do not use sharp objects to remove ice to avoid damaging the interior.
Unusual noises can result from various factors, such as uneven placement or objects touching the back of the fridge. Ensure the refrigerator is level and free from any contact with surrounding items. If noises continue, consult the user manual or contact customer support.
To replace the light bulb, first unplug the refrigerator. Locate the light cover inside the fridge and remove it. Unscrew the old bulb and replace it with a new one of the same type and wattage, then reattach the cover.
Ensure the ice maker is turned on and the water supply is connected. Check for any ice blockages and clear them if necessary. If the problem persists, consult the user manual or contact customer support.
To improve energy efficiency, ensure the refrigerator doors are sealed tightly and minimize door openings. Set the temperature to recommended settings and keep the condenser coils clean.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of mild detergent and water to wipe down all surfaces. Rinse with clean water and dry thoroughly before replacing food items.
After a power outage, the refrigerator should automatically reset. If it does not, unplug the appliance for a few minutes and then plug it back in. Check and adjust temperature settings as needed.