Kenwood KNFD60T18 Instruction Manual

To set the temperature, locate the control panel inside the fridge. Use the up and down arrows to adjust the temperature to the desired setting. Refer to the user manual for optimal settings depending on your storage needs.
First, check if the refrigerator is plugged in and the power is on. Ensure the temperature settings are correctly adjusted. Check door seals for any gaps. If the issue persists, consider contacting customer support for further assistance.
The Kenwood KNFD60T18 has a no-frost system, so manual defrosting is not required. However, if ice builds up, refer to the user manual for troubleshooting steps.
Unplug the unit before cleaning. Use a mild detergent and warm water to wipe down shelves and surfaces. Avoid abrasive cleaners. Dry thoroughly before plugging back in.
Unplug the refrigerator. Locate the light cover inside the fridge, remove it, and replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the fridge back in.
This may be due to a blocked defrost drain. Check and clear the drain located at the back of the fridge. Ensure the refrigerator is level to prevent water accumulation.
Clean spills immediately and store food in airtight containers. Place an open box of baking soda inside the fridge to absorb odors. Regularly clean the interior with mild detergent.
Check for obstructions in the door seals. Inspect the seals for damage and clean them with warm soapy water. If the problem persists, consider replacing the door gasket.
It is advisable to let hot food cool to room temperature before storing it in the refrigerator. This prevents unnecessary strain on the cooling system and reduces the risk of food spoilage.
Locate the water filter compartment, usually at the base of the fridge. Turn off the water supply, remove the old filter, and install a new one following the instructions provided in the user manual. Turn the water supply back on and check for leaks.