Kenwood KID60B14 Instruction Manual

To reset the Kenwood KID60B14 dishwasher, press and hold the Start/Reset button for about 3 seconds or until the indicator lights begin to flash. This will cancel the current cycle and reset the dishwasher.
If your Kenwood KID60B14 dishwasher is not draining, check for clogs in the drain hose, ensure the filter is clean, and inspect the sink drain for blockages. Also, make sure the drain pump is functioning correctly.
To clean the filter, remove the lower dish rack and unscrew the filter located at the bottom of the dishwasher. Rinse it under running water and use a soft brush to remove any debris before reinstalling it.
Water leakage in the Kenwood KID60B14 dishwasher can be caused by a damaged door seal, improper loading, or a blocked drain. Inspect the door seal for damage, ensure dishes do not obstruct the door, and check for clogs in the drain system.
Ensure that the spray arms are not obstructed and can rotate freely. Check that you are using the correct detergent and the right amount. Additionally, make sure the filter is clean and the water temperature is adequately hot.
Check that the dishwasher is properly plugged in and that the circuit breaker has not tripped. Also, ensure the door is fully closed and latched, and that the water supply is turned on.
Regularly clean the filters, check and clean the spray arms, and wipe down the door seals. Run an empty cycle with a dishwasher cleaner monthly to remove limescale and grime.
Unusual noises can result from dishes touching the spray arms or loose items inside the dishwasher. Ensure dishes are loaded properly and check for any foreign objects in the bottom of the tub that might be causing noise.
Refer to the user manual for specific error code meanings. Common solutions include resetting the dishwasher, checking water supply, and inspecting connections or hoses for issues.
Yes, tablet detergents can be used in the Kenwood KID60B14 dishwasher. Place the tablet in the detergent dispenser and ensure the dispenser door is fully closed before starting a wash cycle.