Kenwood KFC60SS15 Instruction Manual
![Kenwood KFC60SS15 manual cover](/images/VECIlXESjAcmtsqDRErniplj/thumbs/thumb175x175.webp)
To reset the temperature settings, press the 'Temperature' button until you reach the desired setting. The default recommended temperature is 4°C for the refrigerator and -18°C for the freezer.
Unusual noises can be caused by the refrigerator not being level, items inside vibrating, or the condenser fan being obstructed. Ensure the refrigerator is on a level surface and check for any obstructions.
Check if the vents are blocked, ensure the door seals are intact, and verify the temperature settings. If the issue persists, it may require professional servicing.
Unplug the refrigerator and locate the condenser coils at the back or bottom. Use a vacuum or brush to remove dust and debris from the coils.
Regularly clean the interior every month, check the door seals quarterly, and clean the condenser coils every six months to ensure optimal performance.
Locate the filter compartment, turn the old filter counterclockwise to remove it, and install the new filter by turning it clockwise until secure. Run water through the new filter for a few minutes before use.
Ensure the ice maker is turned on, check the water supply line for kinks, and make sure the freezer temperature is set correctly. If issues persist, consult a technician.
Keep the refrigerator well-stocked but not overcrowded, ensure the door seals are tight, and place the fridge away from heat sources to maintain energy efficiency.
Refer to the manual for a list of error codes. Common issues include temperature sensor failures or door left open. Address the specific issue as indicated in the manual.
Turn off the refrigerator and remove all items from the freezer. Leave the door open to allow the ice to melt naturally. Use towels to absorb water and clean the interior once defrosted.