Jonsered LT 2318 CMA 2015 Instruction Manual

To change the cutting height, locate the height adjustment lever on each wheel and adjust them to the desired position. Ensure that all wheels are set to the same height for an even cut.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 10W-30 for colder conditions. Always check the oil level before use and change it regularly according to the maintenance schedule.
Ensure the fuel tank is filled with fresh gasoline, the spark plug is connected and in good condition, and the air filter is clean. Also, check that the safety features, like the brake lever, are engaged properly.
Sharpen the mower blades at least once per mowing season or more often if you notice uneven or poor quality cuts. Dull blades can cause damage to the grass and strain the engine.
The recommended tire pressure for the Jonsered LT 2318 CMA is usually around 10 PSI for the front tires and 14 PSI for the rear tires. Always check the manufacturer's manual for specific recommendations.
After each use, use a garden hose to wash off grass clippings from the mower deck. Allow it to dry, then apply a silicone spray or a deck wash solution to help prevent future buildup.
Always wear protective eyewear and sturdy footwear. Ensure that the lawn is clear of debris before mowing, and never refuel the mower when the engine is hot. Follow all safety instructions in the user manual.
Clean the mower thoroughly, empty the fuel tank, and change the oil. Store it in a dry, sheltered place, and disconnect the battery if applicable. Cover it to protect against dust and moisture.
Check for loose bolts, unbalanced blades, or debris lodged in the mower deck. Tighten any loose parts, balance or replace the blades, and clear any obstructions.
Keep the battery terminals clean and free of corrosion. Charge the battery regularly, especially during long periods of inactivity, and follow the manufacturer’s guidelines for maintenance.