Hotpoint SH6 A1Q GRD 1 Quick Start Guide
![Hotpoint SH6 A1Q GRD 1 Fridge manual cover](/images/DIaaCJAblnoLuuYEiHBLcRIt/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the temperature control dial inside the fridge. Turn the dial clockwise to cool the fridge further and counterclockwise to make it warmer.
Ensure the fridge is plugged in and the temperature setting is correct. Check for any obstructions in the vents and ensure the door seals are clean and intact. Clean the condenser coils if necessary.
The Hotpoint SH6 A1Q GRD 1 is a frost-free model, so manual defrosting is not required. However, it's good to occasionally check and ensure no frost buildup is present.
Water pooling can occur if the defrost drain is blocked. Check the drain located at the back of the fridge and clear any obstructions.
Use a solution of mild detergent and warm water to wipe down the interior shelves and walls. Avoid abrasive cleaners that may damage the surface. Dry thoroughly before restocking.
Ensure the fridge is level and not touching any walls or cabinets. Check for loose items inside that may vibrate and ensure the compressor is in good working order.
First, check if the bulb needs replacing. If the bulb is functional, inspect the light switch and wiring for any faults. Consult a technician if necessary.
Regularly clean the door seals with a damp cloth and mild detergent. Check for any tears or gaps and replace the seals if they are damaged to ensure proper sealing.
Organize food by type, with raw meats at the bottom and cooked or ready-to-eat foods above. Ensure air can circulate by not overfilling the fridge.
Check if the door seals are tight and not allowing air leaks. Verify that the temperature settings are not too low and that the condenser coils are clean.