Epson WorkForce 610 v2 User's Guide
en
Network Installation Guide WorkForce 610 Series
Artisan 710 Series
2
Contents
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Choose Your Connection Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wireless Network Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connect Wirelessly Using the Setup Wizard . . . . . . . . . . . . . . . . . . . . . 5
Connect Wirelessly Using Advanced Setup . . . . . . . . . . . . . . . . . . . . . 9
Create an Ad-Hoc Wireless Connection . . . . . . . . . . . . . . . . . . . . . . 16
Wired (Ethernet) Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Install Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Finish the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setup Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Printing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Scanning Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Print a Network Status Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Copyright Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Before You Begin 3
Before You Begin
Make sure you installed ink cartridges and loaded paper as described on the Start Here sheet. Then follow the instructions in this guide to set up the printer for use on a network.
Tip:
For a video tutorial and other information about setting up a wireless network, go to: epson.com/support/wireless.
Do one of the following:
If youre installing the printer for the first time, see Choose Your Connection Type on page 4.
If youre setting up an additional computer to use the printer on the network, follow the steps in Install Software on page 24.
4 Choose Your Connection Type
Choose Your Connection Type
Wireless To connect the printer wirelessly, see page 5.
Note:
If you want to print wirelessly but do not have an access point or router, see Create an Ad-Hoc Wireless Connection on page 16.
Wired To connect the printer using an Ethernet cable, see page 23.
Wireless Network Installation 5
Wireless Network Installation
To connect to your printer wirelessly, you need to know the name (SSID) of your wireless network. If it has security enabled, you also need to know the WEP key or WPA passphrase. Write down your network and security information in the space provided below:
Network name (SSID): _________________________________________
WEP key or WPA passphrase: ____________________________________
Note:
Your printer is compatible with 802.11b and 802.11g. If your router or access point supports 802.11n (Wireless N), makes sure it is set to compatibility mode to allow 802.11b and 802.11g devices to connect to it.
Your printer supports the following wireless security modes: WEP, WPA, and WPA2.
If you dont know your wireless network name (SSID), WEP key, or WPA passphrase, contact the person who set up your wireless network before you begin.
If your WPA passphrase contains upper- or lowercase letters, be sure to note it correctly.
Connect Wirelessly Using the Setup Wizard
Follow the steps below to connect to your printer wirelessly.
1. Select F Setup on the printers control panel, then press OK.
2. Press l or r to select Network Settings, then press OK.
6 Wireless Network Installation
3. Press OK to select Wireless LAN Setup.
4. Press OK to select Wireless Setup Wizard.
5. Press u or d to select the name of your wireless network, then press OK.
If your network name isnt listed, try the following:
Make sure that your wireless router or access point is turned on and working correctly. Press the y Back button to return to the previous screen, press OK to select Wireless Setup Wizard, then repeat step 5.
If you still cant find the network name in the list, your router or access point is not broadcasting its network name. Press the y Back button, then see Connect Wirelessly Using Advanced Setup on page 9.
6. Do one of the following:
If your wireless network doesnt have security enabled, continue with step 9.
If your wireless network has security enabled, continue with step 7.
Wireless Network Installation 7
7. Use the arrow buttons on the printers control panel to enter your WEP key or WPA passphrase. Press the x Menu button to switch between uppercase, lowercase, or numeric/special characters.
Important:
WPA passphrases and WEP keys in ASCII format are case-sensitive. Be sure to enter upper- or lowercase letters as necessary.
Press x Menu to switch between uppercase (ABC), lowercase (abc), or numeric/special (123) characters.
Press u or d until you see the character you want.
Press l or r to move the cursor.
Press to delete a character.
8. When youre done entering your WEP key or WPA passphrase, press OK.
Indicates current selection. Press the x Menu button to switch between uppercase, lowercase, or numeric/special characters.
From the printers control panel: Press u or d to select a character. Press l or r to move the cursor. Press to delete a character. Press OK when done.
8 Wireless Network Installation
9. When you see a screen like this one, verify that the settings are correct. If you need to change a setting, press y Back until you see the setting you need to change.
10. Once you have verified that your network settings are correct, press OK to save the settings and return to the Network Settings menu.
11. Press the Home button to exit the Network Settings Menu.
12. Wait for the printer to connect to your wireless network (this can take up to 90 seconds).
Once its connected, you see the WiFi icon and a signal strength indicator on the printers control panel.
13. Continue with Install Software on page 24.
Note:
If the printer doesnt connect to your wireless network after 90 seconds, the WEP key or WPA passphrase may have been entered incorrectly. See Connect Wirelessly Using the Setup Wizard on page 5 to select your network settings again.
If the printer still doesnt connect to your wireless network, see The printer cannot find or connect to the wireless router or access point on page 31.
Wireless Network Installation 9
Connect Wirelessly Using Advanced Setup
Use this setup method if your access point or router isnt broadcasting its network name (SSID). Make sure you know the type of security your access point or router uses (WEP, WPA, or WPA2), and the key or passphrase.
1. Select F Setup on the printers control panel, then press OK.
2. Press l or r to select Network Settings, then press OK.
3. Press OK to select Wireless LAN Setup.
4. Press u or d to select Advanced Setup, then press OK.
10 Wireless Network Installation
5. Press u or d to select Manual Wireless LAN Setup, then press OK.
6. When you see this screen, press OK.
7. Press u or d to select Infrastructure Mode, then press OK.
8. Press u or d to select Enter SSID, then press OK.
Wireless Network Installation 11
9. Use the arrow buttons on the printers control panel to enter your wireless network name (SSID). Press the x Menu button to switch between uppercase, lowercase, or numeric/special characters.
Important:
Network names are case-sensitive. Be sure to enter upper- or lowercase letters as necessary.
Press x Menu to switch between uppercase (ABC), lowercase (abc), or numeric/special (123) characters.
Press u or d until you see the character you want.
Press l or r to move the cursor.
Press to delete a character.
10. When youre done entering your wireless network name, press OK.
Indicates current selection. Press the x Menu button to switch between uppercase, lowercase, or numeric/special characters.
From the printers control panel: Press u or d to select a character. Press l or r to move the cursor. Press to delete a character. Press OK when done.
12 Wireless Network Installation
11. Press u or d to select the security mode that your wireless network is using, then press OK.
Note:
If your wireless network doesnt have security enabled, select None, then press OK.
12. Do one of the following:
If your wireless network uses WPA or WPA2 as the security mode, continue with Select WPA Security Settings on page 13.
If your wireless network uses WEP as the security mode, continue with Select WEP Security Settings on page 14.
If your wireless network doesnt have security enabled, continue with Confirm Your Network Settings on page 15.
Wireless Network Installation 13
Select WPA Security Settings
1. Use the arrow buttons on the printers control panel to enter your WPA passphrase. Press the x Menu button to switch between uppercase, lowercase, or numeric/special characters.
Important:
WPA passphrases are case-sensitive. Be sure to enter upper- or lowercase letters as necessary.
Press x Menu to switch between uppercase (ABC), lowercase (abc), or numeric/special (123) characters.
Press u or d until you see the character you want.
Press l or r to move the cursor.
Press to delete a character.
2. When youre done entering the WPA passphrase, press OK.
3. Continue with Confirm Your Network Settings on page 15.
Indicates current selection. Press the x Menu button to switch between uppercase, lowercase, or numeric/special characters.
From the printers control panel: Press u or d to select a character. Press l or r to move the cursor. Press to delete a character. Press OK when done.
14 Wireless Network Installation
Select WEP Security Settings
1. Press u or d to select Alphanumeric if your WEP key is ASCII, or select Hexadecimal if your WEP key is in hexadecimal format.
Note:
If the WEP key is 5 or 13 characters, its ASCII. If the WEP key is 10 or 26 characters, its hexadecimal.
2. Use the arrow buttons on the printers control panel to enter your WEP key. Press the x Menu button to switch between uppercase, lowercase, or numeric characters.
Important:
WEP keys in ASCII format are case-sensitive. Be sure to enter upper- or lowercase letters as necessary.
Indicates current selection. Press the x Menu button to switch between uppercase, lowercase, or numeric characters.
From the printers control panel: Press u or d to select a character. Press l or r to move the cursor. Press to delete a character. Press OK when done.
Wireless Network Installation 15
Press x Menu to switch between uppercase (ABC), lowercase (abc), or numeric (123) characters.
Press u or d until you see the character you want.
Press l or r to move the cursor.
Press to delete a character.
3. When youre done entering the WEP key, press OK.
4. Continue with the next section.
Confirm Your Network Settings
1. When you see a screen like this one, verify that the settings are correct. If you need to change a setting, press y Back until you see the setting you need to change.
2. Once you have verified that your network settings are correct, press OK to save the settings and return to the Network Settings menu.
3. Press the Home button to exit the Setup menu.
16 Wireless Network Installation
4. Wait for the printer to connect to your wireless network (this can take up to 90 seconds).
Once its connected, you see the WiFi icon and a signal strength indicator on the printers control panel.
5. Continue with Install Software on page 24.
Note:
If the printer doesnt connect to your wireless network after 90 seconds, the SSID, WEP key, or WPA passphrase may have been entered incorrectly. See Connect Wirelessly Using Advanced Setup on page 9 to select your network settings again.
If the printer still doesnt connect to your wireless network, see The printer cannot find or connect to the wireless router or access point on page 31.
Create an Ad-Hoc Wireless Connection
Use this setup method if you want to print wirelessly but do not have an access point or router.
Important:
For Windows users: If your computer is connected to a network with an Ethernet cable, you need to disconnect it before installing software. When setup is complete, reconnect your computers Ethernet cable.
For Macintosh users: If your computer is connected to a network with an Ethernet cable or you use a modem for Internet access, you cannot set up your printer this way. See Connect Wirelessly Using the Setup Wizard on page 5 or Wired (Ethernet) Installation on page 23 to set up your printer.
1. Select F Setup on the printers control panel, then press OK.
Wireless Network Installation 17
2. Press l or r to select Network Settings, then press OK.
3. Press OK to select Wireless LAN Setup.
4. Press u or d to select Advanced Setup, then press OK.
5. Press u or d to select Manual Wireless LAN Setup, then press OK.
18 Wireless Network Installation
6. When you see this screen, press OK.
7. Press u or d to select Ad Hoc Mode, then press OK.
8. Press u or d to select Enter SSID, then press OK.
Wireless Network Installation 19
9. Use the arrow buttons on the printers control panel to create a unique network name (SSID) to identify your printer. Press the x Menu button to switch between uppercase, lowercase, or numeric/special characters.
Important:
Network names are case-sensitive. Be sure to enter upper- or lowercase letters as necessary.
Press x Menu to switch between uppercase (ABC), lowercase (abc), or numeric/special (123) characters.
Press u or d until you see the character you want.
Press l or r to move the cursor.
Press to delete a character.
Indicates current selection. Press the x Menu button to switch between uppercase, lowercase, or numeric/special characters.
From the printers control panel: Press u or d to select a character. Press l or r to move the cursor. Press to delete a character. Press OK when done.
20 Wireless Network Installation
10. Press OK to select the default channel for your Ad Hoc network.
11. Continue with the next section.
Choose Security Settings
1. Press u or d to select the security mode you want to use for the Ad Hoc wireless network, then press OK.
Note:
If you dont want to enable security for your Ad Hoc network, select None, then press OK.
2. Do one of the following:
If you selected None as the security mode, continue with Confirm Your Settings and Connect to the Network on page 22.
If you selected WEP as the security mode, continue with step 3.
3. Create a WEP key for the Ad Hoc network. The WEP key can be in alphanumeric (ASCII) format (recommended) or hexadecimal format.
Note:
An alphanumeric WEP key must be 5 or 13 characters. A hexadecimal WEP key must be 10 or 26 characters.
4. Press u or d to select Alphanumeric if your WEP key is ASCII, or select Hexadecimal if your WEP key is in hexadecimal format.
Wireless Network Installation 21
5. Use the arrow buttons on the printers control panel to enter your WEP key. Press the x Menu button to switch between uppercase, lowercase, or numeric characters.
Important:
WEP keys in ASCII format are case-sensitive. Be sure to enter upper- or lowercase letters as necessary.
Press x Menu to switch between uppercase (ABC), lowercase (abc), or numeric (123) characters.
Press u or d until you see the character you want.
Press l or r to move the cursor.
Press to delete a character.
6. When youre done entering the WEP key, press OK.
7. Continue with the next section.
Indicates current selection. Press the x Menu button to switch between uppercase, lowercase, or numeric characters.
From the printers control panel: Press u or d to select a character. Press l or r to move the cursor. Press to delete a character. Press OK when done.
22 Wireless Network Installation
Confirm Your Settings and Connect to the Network
1. When you see a screen like this one, verify that the settings are correct. If you need to change a setting, press y Back until you see the setting you need to change.
2. Once you have verified that your network settings are correct, press OK to save the settings and return to the Network Settings menu.
3. Press the Home button to exit the Setup menu.
4. On your computer, connect to the wireless network name you created on page 19 (see your computer or wireless adapters documentation for details).
5. Continue with Install Software on page 24.
Wired (Ethernet) Installation 23
Wired (Ethernet) Installation
1. Connect an Ethernet network cable to the LAN (10/100) port on your printer.
2. Connect the other end to any available LAN port on your router, access point, or hub.
Note:
If youre switching from a wireless to a wired network connection, you need to disable the wireless adapter using the printers control panel. Select F Setup on the printers control panel, select Network Settings > Wireless LAN Setup > Advanced Setup > Disable Wireless LAN. Select Yes, then press OK.
3. Continue with the next section to install software.
24 Install Software
Install Software
Follow these steps for each computer you want to use with your printer over the network. The screens show the WorkForce 610 Series, but the steps are the same for the Artisan 710 Series.
1. Insert the printer software CD.
2. Windows Vista: If you see the AutoPlay window, click Run SETUP.EXE. When you see the User Account Control screen, click Continue.
Windows XP: When you see the Software Installation screen, go to step 3.
Mac OS X: Double-click the icon.
3. Click Install.
4. When you see this screen, select Install driver for network connection and click Next.
Install Software 25
5. When you see this screen, click Next to start network setup.
6. Make sure that your printer is turned on and connected to your network.
7. When you see the Firewall Warning screen, click Next.
Note:
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup continue. Do not select Ask Me Later, Keep Blocking, or Block.
If you dont allow EpsonNet Setup to continue, you will not be able to install your printer. You might need to contact your firewall provider for assistance.
26 Install Software
8. Wait while EpsonNet Setup configures your printer for the network.
9. Do one of the following:
If you see the Installation Complete screen, continue with the instructions for finishing the installation for Windows on page 28 or Macintosh on page 29.
Install Software 27
If no available printers are found on your network, see EpsonNet Setup was unable to find my printer on the network on page 32.
If EpsonNet Setup finds more than one printer on your network, select the printer you want to configure, then click Next. When you see the Installation Complete screen, continue with Finish the Installation on page 28.
If you are installing the printer in Ad Hoc mode and you see this screen, make sure your computers wireless adapter is set to assign IP addresses automatically. Then select Acquire the IP Address Automatically using DHCP (Recommended) and click Next. When you see the Installation Complete screen, continue with the steps on the next page.
28 Finish the Installation
Finish the Installation
Follow the steps for your operating system:
Windows below
Macintosh on page 29
Windows
1. Print a test page, then click Finish.
2. Follow the prompts on the screen to install bonus software and finish the installation.
3. When installation is complete, restart your computer.
Youre ready to scan and print. See your printed documentation and on-screen Epson Information Center for details.
Finish the Installation 29
Macintosh
1. Click Save to install an application that allows you to access the printers memory card slots over the network.
2. Select where you would like to install the application, then click Save.
3. Click Finish.
30 Troubleshooting
4. When you see this screen, click Add Printer.
5. Follow the steps on the right side of the screen to add your EPSON TCP/IP printer.
Note:
It may take up to 90 seconds for your computer to find the EPSON TCP/IP printer on the network.
6. Follow the prompts on the screen to print a test page, install bonus software, and finish the installation.
7. When installation is complete, restart your computer.
Youre ready to scan and print. See your printed documentation and on-screen Epson Information Center for details.
Troubleshooting
If you have problems setting up or using your product on a network, check these sections for help:
Setup Problems below
Printing Problems on page 33
Scanning Problems on page 34
This section also explains how to print a Network Status Sheet (see page 35).
Troubleshooting 31
Setup Problems
The printer cannot find or connect to the wireless router or access point
Try connecting to the wireless router or access point with your computer or another device to confirm that it is working correctly.
Make sure that the printer is within range of your router or access point.
Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or large metal object such as a filing cabinet.
Make sure there arent any access restrictions (such as MAC address filtering) set on the wireless router or access point. If access restrictions are set, register the printers MAC address on the router or access point. Print a Network Status Sheet (see page 35) to obtain the MAC address. Then see your router or access points documentation for instructions.
If your wireless router or access point doesnt broadcast its network name (SSID), see Connect Wirelessly Using Advanced Setup on page 9 for instructions on connecting to your wireless network. If your wireless router or access point has wireless security enabled, you will also need to know what kind of security it is using.
If the printer doesnt connect to your wireless network, the WEP key or WPA passphrase may have been entered incorrectly. See Wireless Network Installation on page 5 to select your network settings again.
The printer is compatible with 802.11b and 802.11g. If your router or access point supports 802.11n (Wireless N), makes sure that it is set to compatibility mode to allow 802.11b and 802.11g devices to connect to it.
If your network has a firewall and you did not allow access when you installed the software, you will need to reinstall the software following the instructions on page 24. You might need to contact your firewall provider for assistance.
32 Troubleshooting
EpsonNet Setup was unable to find my printer on the network
1. If you see a screen like this one, do one of the following:
If you connected the printer wirelessly, verify that the printer is turned on and the WiFi icon appears on the printers control panel. Select Wi-Fi setup using the printers control panel, then click Next.
If you connected the printer to your network with an Ethernet network cable, verify that the printer is turned on and connected to your network. Select Wired Network (Ethernet) setup, then click Next.
If you created an Ad-Hoc wireless connection, do one of the following:
For Windows users: If your computer is connected to a network with an Ethernet cable, disconnect it. When setup is complete, reconnect your computers Ethernet cable.
For Macintosh users: If your computer is connected to a network with an Ethernet cable, you cannot set up your printer this way. See page 5 or page 23 to set up your printer.
If youre switching from a wireless to a wired network connection, you need to disable the wireless adapter using the printers control panel. Select F Setup on the printers control panel, select Network Settings > Wireless LAN Setup > Advanced Setup > Disable Wireless LAN. Select Yes, then press OK.
2. Continue clicking Next until EpsonNet Setup begins to search for your printer. Then continue with step 9 on page 26.
Troubleshooting 33
Software installation failed
Make sure that the printer is connected to your network (see page 5 for wireless or page 23 for Ethernet). Then remove and reinsert the CD to reinstall the printer software.
Cannot communicate on a wired LAN
If youre switching from a wireless to a wired network connection, you need to disable the wireless adapter using the printers control panel. Select F Setup on the printers control panel, select Network Settings > Wireless LAN Setup > Advanced Setup > Disable Wireless LAN. Select Yes, then press OK.
The printer does not appear in the Add Printer window (Mac OS X)
Make sure the printer driver was installed correctly and that your computers TCP/ IP settings are configured correctly.
Cannot access a memory card over the network
Remove the memory card from the printer. Select F Setup on the printers control panel, then select Network Settings > File Sharing Setup > Network > Read/Write. Press OK, then press OK again to update the setting.
For Macintosh, follow the instructions on page 29 to install an application that allows you to access the printers memory card slots over the network.
Printing Problems
Cannot print over the network
For wireless connections, print a Network Status Sheet (see page 35). If the Link Status is Disconnected, make sure the wireless router or access point is turned on and the settings are correct for your wireless network.
For wired connections, print a Network Status Sheet (see page 35) and make sure the settings are correct for your network.
If the Network Status is Disconnected, try the following:
Make sure the Ethernet cable is securely connected to both the printer and your router, access point, switch, or hub.
Try connecting to another port on your router, access point, switch, or hub.
34 Troubleshooting
Try connecting the printer to another router, access point, switch, or hub.
Try connecting the printer to your router, access point, switch, or hub with another Ethernet cable.
When using TCP/IP, make sure the printers IP address is set correctly for your network. If your network does not assign IP addresses using DHCP, you need to set the IP address manually.
Printing is slow or the print is cut off
For wireless connections, print a Network Status Sheet (see below) and check the Signal Strength. Or check the number of bars next to the WiFi icon on the printers control panel. If the Signal Strength is poor or you see only one or two bars, try moving the printer closer to your wireless router or access point. Avoid placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large metal objects such as a filing cabinet.
A dial-up connection dialog box appears when printing with EpsonNet Print
If you use a dial-up connection for Internet access, you will see this message every time you print. Try connecting to the Internet using a LAN connection or set your dial-up connection to dial manually (Never dial a connection).
Scanning Problems
Cannot find the scanner or start Epson Scan
If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart, turn the printer off and back on, and then try restarting Epson Scan. Check the Timeout Setting in EPSON Scan Settings. For details, see the Epson Scan Help.
If you have a firewall or Internet security software installed, the search feature in EPSON Scan Settings may not work correctly. In this case, print a Network Status Sheet (see below), click EPSON Scan Settings > Add > Enter address, and enter the IP address manually.
If you are scanning a large document at high resolution, a communication error may occur. If the scan did not complete, lower the resolution.
Copyright Notice 35
Print a Network Status Sheet
1. If necessary, select F Setup on the printers control panel to enter the Setup menu.
2. Select Network Settings.
3. Select Confirm Network Settings.
4. Press the x Start button to print a network status sheet.
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other equipment.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporations operating and maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
Software License Agreements
In addition to software program rights owned by Seiko Epson Corporation, this product also includes open-source software. See the Software Notices section in the online Epson Information Center for a list of open-source software and software license terms applied to this printer.
Trademarks
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
WorkForce and Artisan are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
2009 Epson America, Inc. 4/09