Epson Stylus Pro 7800 v2 Quick Reference Guide
en
Epson Stylus Pro 7800/9800 QUICK REFERENCE GUIDE
Printed in USA CPD-20272
Control Panel Lights and Buttons
Menu button
Hold for 3 seconds to clean the print head.
Paper Feed down button
Left arrow or Paper Source button
Pause light and button
Hold for 3 seconds to cancel a print job or reset the printer.
Power light and button
Paper Feed up button
Enter button
Hold for 3 seconds to cut roll paper after printing.
Paper lightInk light
Maintenance tank gauge
Ink cartridge gauges
SP7898_QRGcvr.indd 1 7/29/05 11:47:16 AM
Loading Roll Paper
1 Slide the black paper stop off the end of the spindle.
Note: To use paper with a 3-inch core, attach the gray adapters to the paper stops at each end. See your Printer Guide for details.
2 Position the roll as shown, then slide it onto the spindle.
3 Slide the black paper stop back onto the spindle and insert it rmly into the end of the roll.
4 Open the roll paper cover.
5 Place the roll paper in the printer as shown. (The black end of the spindle goes on the left.)
6 Make sure the printer is turned on, then press the Paper Source button until the or icon
appears.
1
7 Release the paper lever.
8 Feed the paper into the slot and pull it all the way through.
9 Turn the roll back to remove any slack. Then align the bottom edge with the horizontal line and the right edge with the vertical line.
10 Return the paper lever to the locked position. Then close the roll paper cover.
11 Press the Pause button. The paper feeds into printing position.
Caution: To prevent creasing the paper, remove it from the paper path and roll it up when youre not printing.
SP7898_QRGin_CPD20272.indd 1 8/5/05 10:15:28 AM
2
Printing on Posterboard When you print on posterboard or other thick media (more than 19 mil thick), you should open the front cover before loading as described below.
1 Make sure the printer is on and the roll paper cover is closed.
2 Press the Paper Source button until the icon appears on the LCD.
3 Release the paper lever.
Loading and Using Cut Sheet Paper
1 Remove any roll paper from the paper path. Make sure the printer is on and the roll paper cover is closed.
2 Press the Paper Source button until the icon appears on the LCD.
3 Release the paper lever.
Note: If youre printing on small sheets or ne art paper, do not release the paper lever.
4 Feed the sheet into the paper slot. Make sure the right edge of the paper is straight and aligned with the marks on the roll paper cover.
5 If you released the paper lever, return it to the locked position.
6 Press the Pause button. The sheet feeds into the printing position automatically and READY appears on the control panel.
Caution: To avoid damaging the printer, never move the paper lever during printing, or while the Power or Pause light is ashing.
7 Print your page. After it is nished, the sheet stays in the printer.
8 To remove your print, press the button.
SP7898_QRGin_CPD20272.indd 2 8/5/05 10:15:29 AM
3
4 Open the front cover. (The cover has special tabs that act as paper supports when the cover is open.)
5 Feed the posterboard into the paper slot until it meets resistance.
Note: If youre using stock more than 39 inches long (Epson Stylus Pro 9800 only), load it long edge rst (in landscape orientation).
6 Align the board with the mark on the roll paper cover.
7 Return the paper lever to the locked position. Then close the front cover.
8 Press the Pause button. The board feeds into the printing position automatically and READY appears on the control panel.
9 Run your print job. After it is nished, the posterboard stays in the printer.
10 To remove the print, hold it and release the paper lever.
SP7898_QRGin_CPD20272.indd 3 8/5/05 10:15:29 AM
8 Press the button to start the alignment process. Each head alignment takes about 7 minutes.
Caution: Make sure you dont open the front cover or turn off the printer during the alignment process.
9 When the uni-directional alignment is nished, press the button until BI-D 2-COLOR is highlighted. Then press again to start the bi-directional black alignment.
10 When the bi-directional black alignment is nished, press the button until BI-D ALL is highlighted. Then press .
11 When the nal alignment is nished, press the Pause button.
Checking, Cleaning, and Aligning the Print Head
Checking and Cleaning the Print Head If your printed image shows a color shift or horizontal lines, you should check the print head to see if any nozzles are clogged or deected. The printer will then run an automatic cleaning cycle if necessary.
1 Make sure paper is loaded in the printer.
2 Press the Menu button.
3 Press to highlight TEST PRINT, then press Menu. NOZZLE CHECK is selected.
4 Press Menu, then press to start printing the nozzle check pattern.
To clean the print head manually, press the Menu button and hold it for 3 seconds. The cleaning cycle takes about one minute and does not use any paper.
Note: You can also run nozzle checks and head cleaning cycles from your computer using the Epson Printer Utility (Macintosh) or the Utility tab in your printer driver (Windows). See your Printer Guide for more information.
Aligning the Print Head If your prints look grainy or blurry, or you see misregistration or ghosting, you need to align the print head.
1 Make sure the printer is turned on. Then load Epson Doubleweight Matte, Enhanced Matte, or Premium Luster Photo Paper.
2 Press the Menu button.
3 Press the button until HEAD ALIGNMENT is highlighted. Then press Menu. PAPER THICKNESS is highlighted.
4 Press the Menu button again. The STANDARD setting is highlighted. This is the correct thickness setting for most Epson papers.
5 Press the button to save the setting.
6 Press , then press to highlight ALIGNMENT.
7 Press the Menu button to highlight AUTO, then press Menu again. UNI-D (uni-directional) is highlighted. This is the type of alignment to start with.
HEAD ALIGNMENT PAPER THICKNESS
ALIGNMENT
4
ALIGNMENT AUTO
UNI-D BI-D 2 COLOR BI-D ALL
SP7898_QRGin_CPD20272.indd 4 8/5/05 10:15:30 AM
5 Continue
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink runs out, replace the cartridge, and then continue the job.
Checking Ink and Maintenance Tank Levels The easiest way to check ink levels is from the control panel. The numbers below the ink cartridge icons correspond to the 8 cartridge slots in the printer. The larger icon or icons on the right show the status of the maintenance tank(s). The icons show the percentage of ink or maintenance tank capacity remaining.
Replacing Ink Cartridges When the ink light ashes, and INK LOW is displayed on the LCD, one or more cartridges are nearly empty. Check the LCD to see which cartridge is low, and make sure you have the correct replacement cartridge.
You can install any combination of 110 ml and 220 ml cartridges.
Epson UltraChrome K3TM ink cartridges
When one of the icons shows empty and INK OUT is displayed on the LCD panel, the cartridge is empty. To replace the cartridge, rst make sure the printer is on.
1 Press the ink compartment cover to open it.
2 Raise the ink lever to the unlocked position.
3 Remove the empty ink cartridge from the printer.
Warning: Do not shake the empty cartridge, or ink may leak. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, ush them immediately with water.
4 Make sure the replacement cartridge is the correct color, and remove it from its package. Gently shake the cartridge before installing it.
100-81%
80-61%
60-41%
40-21%
20% or less
Ink low
Ink out
Cartridge error or no cartridge
Slot no. Ink color 110 ml 220 ml
1 Light Light Black T562900 T563900 2 Light Magenta T562600 T563600 3 Light Cyan T562500 T563500 4 Light Black T562700 T563700 5 Photo Black T562100 T563100 Matte Black T566800 T567800 6 Cyan T562200 T563200 7 Magenta T562300 T563300 8 Yellow T562400 T563400
SP7898_QRGin_CPD20272.indd 5 8/5/05 10:15:30 AM
Replacing Printer Parts
Replacing Ink Cartridges (continued)
5 Hold the cartridge with the arrow mark pointing toward the printer. Then insert the cartridge into the slot. Dont force it.
Note: If you cant insert the cartridge smoothly, you may have the wrong cartridge. Check the package and product code. If the Ink light remains on after installing the cartridge, try removing and then reinserting it.
6 Return the ink lever to its locked position.
7 Close the ink compartment cover.
Replacing the Printer Cutter Blade If you notice that the paper isnt cut cleanly, you may need to replace the cutter blade (part # C12C815291). You can check its status as described below:
1 Press the Menu button on the printer, then press until PRINTER STATUS is highlighted.
2 Press Menu, then press until SERVICE LIFE is highlighted.
3 Press Menu. The cutter service life is displayed. E*****F indicates a new cutter. If no stars are displayed, the cutter may need to be replaced.
Caution: Cutting the following media may shorten the cutters life and is not recommended: Fine art paper (such as Epson UltraSmooth, Textured, or Velvet) Canvas Backlight lm Vinyl
Follow these steps to replace the cutter:
1 Press the Menu button on the printer, then press until MAINTENANCE is highlighted.
2 Press the Menu button. CUTTER REPLACEMENT is highlighted.
3 Press Menu to display EXECUTE, then press . The print head moves to the cutter replacement position.
4 Open the front cover.
Continue
6
SP7898_QRGin_CPD20272.indd 6 8/5/05 10:15:31 AM
Replacing Printer Parts (continued)
5 Hold down the side pin, as shown, then turn the latch to the right.
6 Release the side pin and carefully remove the cutter blade.
Replacing the Maintenance Tank The Epson Stylus Pro 7800 has one maintenance tank (on the right side) and the 9800 has two (one on either side). You need to replace the maintenance tank (part # C12C890191) when you see MAINTENANCE TANK FULL on the LCD. The ink light also turns red.
1 If you have the Epson Stylus Pro 9800, check the LCD to determine which tank needs to be replaced (left or right).
Note: The printer will not print if one of the maintenance tanks is full. On the Epson Stylus Pro 9800, the right tank is used more than the left. To maximize tank life, you can switch the tanks.
7 Insert the new cutter blade.
8 Hold down its side pin and secure it with the latch.
9 Close the front cover. The carriage returns to the home position.
7
2 Make sure the printer is on, and pull out the maintenance tank as shown.
Caution: Do not tip the tank, or ink may spill out.
3 Place the used tank in the plastic bag included with the new tank.
4 Insert the new tank.
SP7898_QRGin_CPD20272.indd 7 8/5/05 10:15:33 AM
Control Panel Menus Boldface type indicates the default setting. Press the Menu button to access the menus.
Continue
8
Menu Item Settings / Explanation
PRINTER SETUP ROLL PAPER COUNTER Available only if REMAINING PPR SETUP ROLL PAPER LENGTH is enabled in Maintenance Mode ROLL LENGTH ALERT
PLATEN GAP STANDARD, NARROW, WIDE, WIDER, WIDEST
PAGE LINE ON, OFF
INTERFACE AUTO, USB, IEEE 1394, OPTIONAL I/F CARD
CODE PAGE PC437, PC850
ROLL PAPER MARGIN DEFAULT, TOP/BOTTOM15mm, TOP 35/BOTTOM15mm, 15mm, 3mm
PAPER SIZE CHECK ON, OFF
PAPER SKEW CHECK ON, OFF
TIME OUT OFF, 30sec, 60sec, 180sec, 300sec
CUTTER ADJUSTMENT EXECUTE
REFRESH MARGIN ON, OFF
AUTO NOZZLE CHECK ON, OFF
AUTO CLEANING ON, OFF
QUIET CUT ON, OFF
INITIALIZE SETTINGS Restores default settings
TEST PRINT NOZZLE CHECK Shows clogged or deected nozzles
STATUS CHECK Ink and paper remaining and status of parts
JOB INFORMATION Ink and paper used for the last 10 jobs; most recent job is number 0
CUSTOM PAPER Information about registered paper congurations
PRINTER STATUS VERSION Current rmware version
PRINTABLE PAGES For the amount of ink remaining in each cartridge
INK LEVEL E*****F for each ink color
MAINTENANCE TANK E*****F
USAGE COUNT Ink in milliliters, paper in square centimeters
CLEAR USAGE COUNT EXECUTE
JOB HISTORY Ink in milliliters and paper in square centimeters for each saved job
TOTAL PRINTS Number of pages printed
SERVICE LIFE E*****F for CUTTER, CR MOTOR (carriage) PF MOTOR (paper feed) HEAD UNIT (print head) CLEANING UNIT PRESSURE MOTOR
SP7898_QRGin_CPD20272.indd 8 8/5/05 10:15:34 AM
Where To Get Help
Control Panel Menus (continued)
Epson and Epson Stylus are registered trademarks and Exceed Your Vision is a trademark of Seiko Epson Corporation. Epson UltraChrome K3 and UltraSmooth are trademarks and Epson Preferred is a service mark of Epson America, Inc.
2005 Epson America, Inc. 7/05
Service
Telephone support
World Wide Web
Support for non-Epson RIP
Access
Call (888) 377-6611. Make sure you have your Unit ID number.
If you experience any difculty with the toll-free number or your Unit ID number, call (562) 276-1305.
Go to http: //support.epson.com to download drivers, access product documentation and troubleshooting, and get technical advice through e-mail.
Contact the RIP manufacturer.
Epson PreferredSM Unit ID number
Date of purchase
Serial number
9
PRINTER STATUS VERSION Current rmware version
PRINTABLE PAGES For the amount of ink remaining in each cartridge
INK LEVEL E*****F for each ink color
MAINTENANCE TANK E*****F
USAGE COUNT Ink in milliliters, paper in square centimeters
CLEAR USAGE COUNT EXECUTE
JOB HISTORY Ink in milliliters and paper in square centimeters for each saved job
TOTAL PRINTS Number of pages printed
SERVICE LIFE E*****F for CUTTER, CR MOTOR (carriage) PF MOTOR (paper feed) HEAD UNIT (print head) CLEANING UNIT PRESSURE MOTOR
CUSTOM PAPER PAPER NUMBER STANDARD, NO. (1 to 10)
PLATEN GAP STANDARD, NARROW, WIDE, WIDER
THICKNESS PATTERN PRINT
THICKNESS NUMBER 1 to 15
CUT METHOD STANDARD, THIN PAPER, THICK PAPER FAST, THICK PAPER SLOW
PAPER FEED ADJUST -0.70% to 0.70%
DRYING TIME 0. 0 sec. to 10.0 sec.
PAPER SUCTION STANDARD, -1, -2, -3, -4
M/W ADJUSTMENT STANDARD, 1, 2
MAINTENANCE CUTTER REPLACEMENT EXECUTE
BK INK CHANGE EXECUTE
POWER CLEANING EXECUTE
CLOCK SETTING MM/DD/YY HH:MM
CONTRAST ADJUSTMENT -20 to +20
HEAD ALIGNMENT PAPER THICKNESS STANDARD, 0.1 mm to 1.5 mm
ALIGNMENT
AUTO UNI-D, BI-D 2-COLOR, BI-D ALL, BI-D #1, BI-D #2, BI-D #3
MANUAL UNI-D, BI-D 2-COLOR, BI-D ALL
SP7898_QRGin_CPD20272.indd 9 8/5/05 10:15:35 AM
Epson Stylus
Pro 7800/9800 QUICK REFERENCE GUIDE
Printed in USA CPD-20272
Control Panel Lights and Buttons
Menu button
Hold for 3 seconds to clean the print head.
Paper Feed down button
Left arrow or Paper Source button
Pause light and button
Hold for 3 seconds to cancel a print job or reset the printer.
Power light and button
Paper Feed