Epson Stylus CX4600 Quick Guide

To clean the print head, navigate to the printer utility on your computer, select the 'Head Cleaning' option, and follow the on-screen instructions. Ensure the printer is turned on and connected.
Check if the ink cartridges are installed correctly and have sufficient ink. Run a nozzle check from the printer utility software to determine if the print head is clogged.
To align the print head, access the printer utility, select 'Print Head Alignment,' and follow the guided steps to complete the process.
For best results, use Epson's recommended photo paper or plain paper. Ensure the paper type is selected correctly in the printer settings.
Open the printer cover, wait for the cartridge holder to stop, press the release tab, and remove the old cartridge. Insert the new cartridge and press it down until it clicks.
Streaks or lines can occur if the print head is clogged. Perform a print head cleaning cycle and ensure the paper type matches the printer settings.
Place the document on the scanner glass, open the Epson Scan software, select the scan mode and settings, and click 'Scan' to begin the process.
Ensure the USB cable is securely connected and the printer is powered on. Reinstall the printer driver and check for any updates.
To reset the printer, turn it off, unplug it from the power source, wait a few minutes, then plug it back in and power it on.
Carefully remove any jammed paper by opening the printer cover and pulling the paper out gently. Ensure there are no torn pieces left inside.