Epson ELPIU03 User's Guide v2
en
Interactive Unit
User's Guide
Important Safety Instructions Make sure you read the Quick Setup Guide and follow the instructions in this document to install the Interactive Unit. Keep the Quick Setup Guide for future reference.
Explanation of Symbols
Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
Installation Precautions
Warning Attachment to the projector should be performed by qualified technicians using only approved mounting equipment. Follow the instructions in the Quick Setup Guide when installing the Interactive Unit. Incomplete or incorrect installation could cause the product to fall and cause
personal injury or property damage. If you apply adhesives to prevent the screws from loosening, or if you use lubricants or oils on the wall plate, the housing may crack and cause the product or the
projector to fall, resulting in personal injury or property damage. Confirm on a regular basis that the screws have not become loose. If you find any loose screws, tighten them firmly. Otherwise, the product or wall plate may fall and
cause personal injury or property damage. Handle the USB cable carefully to avoid fire or electric shock. Observe the following precautions when handling:
- Do not handle the cable with wet hands. - Do not use a cable that is damaged or modified. - Do not pull the cable with too much force when routing it or connecting it to a computer.
Do not apply excessive force to this product when adjusting the projector. Otherwise, the product may cause personal injury.
Caution Do not install the product in a location where there is excessive humidity or dust, near cooking or heating appliances, or in a location exposed to smoke or steam. Fire or electric shock may result.
Usage Precautions
Warning Water infiltration or deterioration and breakage of the product housing could result in electric shock. Never open any covers on the product except as specifically explained in this User's Guide. Never attempt to disassemble or modify the product (including consumables).
Refer all repairs to qualified service personnel. Electrical voltages inside the product can cause severe injury. Disconnect the USB cable and refer all repairs to qualified service personnel under the following conditions:
- If smoke, strange odors or strange noises come from the product. - If liquid or foreign objects get inside the product. - If the product has been dropped or the housing has been damaged. Continuing to use the product under these conditions may result in fire or electric shock.
Caution Use a dry cloth for cleaning (or, for stubborn dirt or stains, a damp cloth that has been wrung dry). Do not use liquid, aerosol cleaners, or solvents such as alcohol,
thinner, or benzine. Do not put anything that exceeds the weight of two Easy Interactive Pens in the pen tray.
Battery Precautions
Warning If liquid leaking from the batteries gets into your eyes, do not rub your eyes. Wash them immediately with clean water and consult a doctor. If liquid from the battery enters your mouth, rinse immediately with plenty of water and consult a doctor. If liquid from the battery comes in contact with your skin or clothes, wash immediately with water. Battery liquid may cause skin damage. Do not leave the batteries or the Easy Interactive Pen inside a vehicle with the windows closed, in places where they will be exposed to direct sunlight, or in places that
may become extremely hot. Thermal deformation or technical malfunction may occur, which could result in fire. Keep batteries out of the reach of children. Batteries are choking hazards and are very dangerous if swallowed. Insert batteries so that the polarities (+ and -) are correctly aligned, to avoid leakage, overheating, or explosion. Do not mix old and new batteries, or batteries of different types. Doing so may cause leakage, overheating, or explosion. Replace batteries as soon as they run out. If a dead battery is left inside the pen for long periods, gas emitted from the battery may cause leakage, overheating, explosion,
or damage to the device. Remove the batteries if you will not be using the pens for a long period of time.
Infrared Precautions
Caution Because this product uses infrared communication, it could interfere with infrared communication from other product(s). If this does happen, move the other product(s) out of the detection area.
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Parts Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Interactive Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Easy Interactive Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pen Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Getting Started
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Installing the Pen Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the Easy Interactive Pen
Calibrating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Checking the Connection Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Performing Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using the Pen as a Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Tablet Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Checking Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Solving Problems
Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Easy Interactive Pen Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Calibration Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Tablet Function Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Where to Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Notices
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Easy Interactive Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 For United States Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 For Canadian Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Copyright Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Contents 6
Introduction The Interactive Unit is a wall-mounted receiver that works with your projector to turn virtually any surface into an interactive whiteboard. You can use it with your projector and whiteboard. The Interactive Unit includes all the hardware and software you need to create interactive presentations using your computer and installed projector.
By using the Interactive Unit, you can use your existing projector as an electronic blackboard. When used in combination with your projector, the following functions become available.
Electronic Blackboard Function When projecting a computer screen from the projector, you can use the Easy Interactive Pen as a mouse. By giving the presenter the ability to perform computer operations on the projected image, lessons or presentations can be moved along smoothly.
Drawing Function If you installed the optional Easy Interactive Tools, you can use the Easy Interactive Pen to write or draw on the projected image. You can also save what you wrote to your computer.
a You can download Easy Interactive Tools from the Epson website at http://www.epson.com.
Product Features 8
Interactive Unit
Name Function
A Easy Interactive Function receiver
Receives signals from the Easy Interactive Pen.
B USB cover Covers the USB cable connection.
Easy Interactive Pen
Name Function
A Battery indicator light When you press the button, the light turns green if there is any remaining battery power. If it does not turn green, replace the batteries. s p.13
B Button Functions as the right button of a mouse.
C Cord attachment slot You can attach a commercially available cord or strap.
Parts Location 9
Pen Tray
Name Function
A Fixing points Attach the pen tray to a whiteboard or wall.
B Security hole Pass a commercially available lock through here.
a It is recommended that the pen tray be tightened with two commercially available M5 bolts.
Parts Location 10
Getting Started Before you can use this product, you need to install the software and prepare the necessary devices.
Install the software necessary to use this product on your computer.
a Insert the CD labeled "Epson Projector Software for Easy Interactive Function" in your computer.
Windows If you see the AutoPlay screen, click Run EIDriverVxxx_Setup.exe. If you see a User Account Control screen, click Continue or Yes.
Mac OS X Double-click EIDriverVxxx_Setup in the Epson window.
b Select your language.
c Follow the on-screen instructions to install the software.
d When you see one of the following screens, select Register to Startup (Windows) or Start up (Mac OS X) and Launch Easy Interactive Driver.
Windows Mac OS X
e Click Finish (Windows) or Continue (Mac OS X).
f Follow the on-screen instructions to finish installing the software and start Easy Interactive Driver.
a You can use the interactive whiteboard function by installing the optional Easy Interactive Tools. You can download Easy Interactive Tools from the Epson website at http:// www.epson.com.
Installing the Software 12
Before you can use the pen, you need to install the batteries.
a Press in the tab on the battery cover as you lift the cover off.
b Install two batteries, inserting the + and - ends as shown.
c Replace the battery cover and press it down until it clicks into place.
a To check the batteries, press the button on the pen. If the battery
indicator is green, the batteries have enough power. s p.9 When replacing the batteries, use two alkaline AAA batteries.
Installing the Pen Batteries 13
Connect the Interactive Unit, the computer, and the projector.
a Check that the projector and the computer are both on.
b Connect the projector's VGA computer cable to the computer's monitor out port.
c Connect the Interactive Unit's USB cable to the computer's USB port.
Connecting the Cables 14
Using the Easy Interactive Pen The Easy Interactive Pen included with your Interactive Unit turns almost any wall or board into an interactive whiteboard. This chapter tells you how to calibrate your system and use the pens.
Calibration sets up the connection between your computer and the Easy Interactive Pen. This simple process ensures that your computer can accurately detect the position of the pen on the projection surface.
You need to calibrate before using the pen for the first time, or if you change the resolution on your computer or connect a different computer. You can use either pen for calibration.
Checking the Connection Status Before you can calibrate, you need to make sure the Easy Interactive Driver is activated on your computer. Make sure the pen icon is displayed in the system tray on your taskbar (Windows) or in the Dock (Mac OS X). It may take a minute for the icon to appear after you turn on the computer and projector.
If the pen icon is displayed Easy Interactive Driver is activated. You can now perform calibration.
If a red ^ is displayed on the pen icon The computer and Interactive Unit are not connected correctly. Try disconnecting and reconnecting the USB cable.
If the pen icon is not displayed Perform the following operation.
Windows Select or Start > All Programs or Programs > Epson Projector > Easy Interactive Driver.
Mac OS X Open the Applications folder, and then select the Easy Interactive Driver icon. If you need more help, s p.21.
a Select Exit from the pen icon on the taskbar to remove it from the taskbar.
Performing Calibration Two types of calibration are available:
Normal, which is faster and appropriate for most situations (25 calibration points)
Advanced, which is recommended when you are projecting very detailed images and need higher accuracy (49 calibration points)
You may need to recalibrate if you change the projector's aspect ratio or if you change the following settings: Auto Setup, Resolution, Tracking, Sync., Position, Aspect, Keystone, or Zoom.
a To start calibration, do one of the following.
Windows
Click the pen icon in the system tray on your taskbar (lower right corner of your screen), then select Calibrate (Normal) or Calibrate (Advanced).
Mac OS X
Calibrating 16
Click the pen icon in the Dock, select Calibrate from the menu bar, then select Calibrate (Normal) or Calibrate (Advanced).
b After you read the message about calibration, click OK.
A flashing circle is displayed in the upper left corner of your projected image.
c Touch the center of the circle with the tip of the pen.
The circle stops flashing. You see another circle on the right.
d Touch the center of the circle again, then repeat. When you get to the end of the row, the next circle appears at the left edge of a new row.
a For the most accurate calibration, make sure you hold the pen
at an angle to the projection surface and touch the center of the circle.
Make sure you are not blocking the signal between the pen and the interactive receiver.
Do not press the button on the pen while calibrating. If you make a mistake or want to stop calibrating, press [Esc]
on your computer keyboard. Then restart the calibration process as described above.
e Continue until all of the circles stop flashing.
Calibrating 17
The Easy Interactive Driver allows you to use the pen as a mouse. If you installed interactive whiteboard software, you can also use the pens to write or draw on the projected image.
You can use the interactive whiteboard function by installing the optional Easy Interactive Tools. You can download Easy Interactive Tools from the Epson website at http://www.epson.com.
Follow these tips to use the pen as a mouse:
For best performance, hold the pen at a slight angle (like a normal pen), rather than perpendicular to the board.
To left-click, tap on the board. To double-click, tap twice. To right-click, tap while pressing the button on the pen. To click and drag, tap and drag with the pen.
Using the Pen as a Mouse 18
If you have installed Easy Interactive Driver, the tablet function in Windows Vista or Windows 7 is enabled. If Office 2003/2007/2010 is installed on your computer, you can use the ink function in Office by using the Easy Interactive Pen as a mouse.
System Requirements
OS The following 32 bit operating systems: Windows Vista*
Windows Vista Service Pack 1 or later*
Windows 7 The following 64 bit operating systems: Windows 7
* Except for the Starter Edition.
Checking Availability When Easy Interactive Driver is installed, check that the tablet function is enabled.
Windows 7
Click Control Panel - System and Security and then System.
If Pen and Single Touch Input Available is displayed in Pen and Touch, the tablet function is available.
Windows Vista
Click Control Panel and then System.
If Available is displayed in Tablet PC functionality, the tablet function is available.
Tablet Function 19
Solving Problems If you have a problem with your product, you can check the following section for troubleshooting information.
Easy Interactive Pen Problems Make sure the USB cable is securely connected to the Interactive Unit
and computer.
Try disconnecting and reconnecting the USB cable.
If you don't see the pen icon on your taskbar (Windows) or in the Dock (Mac OS X), do one of the following:
Windows Select or Start > All Programs or Programs > EPSON Projector > Easy Interactive Driver.
Mac OS X Open the Application folder, then select the Easy Interactive Driver icon.
If you see a red ^ on the pen icon, the computer and Interactive Unit are not connected correctly. Try disconnecting and reconnecting the USB cable.
Make sure the pen batteries have enough power. If the light on the pen doesn't turn green when you press the button, you need to replace the batteries.
Do not stand between the Interactive Unit and the projected image. If there are any obstacles between the Interactive Unit and the pen, it does not operate correctly.
Dim the room lights and turn off any fluorescent lights. Make sure the projection surface and the pen receiver are not in direct sunlight or other sources of bright lighting.
To use it accurately, hold the pen at an angle to the projection surface.
If the pen position is not detected correctly, you may need to recalibrate. s p.16
Calibration Problems If the flashing circles do not appear when you try to calibrate, make
sure the Interactive Unit and the computer are securely connected with the USB cable. s p.14 Try restarting the Easy Interactive Driver. s p.16
If the circles do not stop flashing or if they stop flashing and turn black automatically, make the room dark or turn off any bright lights near the projection surface.
Tablet Function Problems When Easy Interactive Driver is installed, the Easy Interactive Virtual Tablet Driver that allows you to use the tablet function is automatically installed. If other tablet device drivers are already installed and the tablet function does not operate normally, uninstall Easy Interactive Virtual Tablet Driver.
To leave Easy Interactive Driver installed and only uninstall Easy Interactive Virtual Tablet Driver, go to Start - Control Panel - Programs - Uninstall a program, and then remove Easy Interactive Virtual Tablet Driver.
Problems and Solutions 21
If you notice any problems or you think the Interactive Unit is broken, stop using it and contact your local dealer for further advice. Or visit http:// www.epson.com to locate a support or service representative in your area.
Check the website periodically for updates to the Easy Interactive Driver software.
Where to Get Help 22
Notices
General Image size XGA model 63 to 106 inches (4:3 XGA)
60 to 100 inches (16:10 WXGA)
58 to 97 inches (16:9 widescreen)
WXGA model 60 to 100 inches (4:3 XGA)
68 to 113 inches (16:10 WXGA)
66 to 110 inches (16:9 widescreen)
Weight 320 g (11.28 oz)
Dimensions Units: mm (in.)
75 (2.95)
66 (
3. 89
)
196 (7.72)
Electrical Power supply voltage 5 V DC
Current consumption 180 mA
Environmental Temperature Operating: 5 to 35 C (41 to 95 F)
(non-condensing)
Storage: -10 to 60 C (14 to 140 F) (non-condensing)
Easy Interactive Pen Current consumption 57 mA
Power supply voltage 3 V DC
Batteries AAA x 2, Alkaline
Size 168 mm (6.61 in.), diameter 21 mm (0.83 in.)
Weight 33 g (1.16 oz)
Specifications 24
System Requirements For Windows
OS Windows 2000 Service Pack 4 The following 32 bit operating systems: Windows XP Service Pack 2 or later Windows Vista*
Windows Vista Service Pack 1 or later*
Windows 7 The following 64 bit operating systems: Windows 7
CPU Pentium III 1.2GHz or faster Recommended: Pentium M 1.6GHz or faster
Memory 256 MB or more
Hard disk free space
100 MB or more
Display Resolution of XGA (1024 x 768) or better
* Except for the Starter Edition.
For Mac OS X
OS Mac OS X 10.3.x Mac OS X 10.4.x Mac OS X 10.5.x Mac OS X 10.6.x
CPU Power PC G3 900MHz or faster Recommended: Intel Core Duo 1.5GHz or faster
Memory 256 MB or more
Hard disk free space
100 MB or more
Display Resolution of XGA (1024 x 768) or better
Specifications 25
For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
For Canadian Users This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numrique de la classe B est conforme la norma NMB-003 du Canada.
Since the Easy Interactive Pen is so small, FCC Statement for Verification is written in the manual.
FCC Statement for Verification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Compliance Statement 26
According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:
We: Epson America, Inc. Located at: MS 3-13
3840 Kilroy Airport Way Long Beach, CA 90806 Telephone: (562) 290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trade Name: Epson Type of Product: Interactive Unit Model: ELPIU03
Declaration of Conformity 27
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Trademarks Macintosh