Dimplex Burgate BRG20 Self Help Guide
![Dimplex Burgate BRG20 Electric Stove manual cover](/images/VDkINCvbrrGnUEbfTQvmVdHT/thumbs/thumb175x175.webp)
To turn on the Dimplex Burgate BRG20 Electric Stove, locate the power switch on the side or back of the unit. Switch it to the 'On' position to activate the stove.
If the flame effect is not working, ensure that the stove is plugged in and the power switch is on. Check the flame effect settings and adjust as necessary. If the problem persists, consult the user manual or contact customer support.
To clean your stove, turn off and unplug the unit. Use a soft, dry cloth to wipe down the exterior. Avoid using abrasive cleaners or solvents. For detailed cleaning instructions, refer to the user manual.
Regular maintenance includes cleaning the exterior and checking the power cord for any signs of wear or damage. It is also advisable to periodically inspect the flame effect and heater function.
It is not recommended to use an extension cord with your electric stove due to safety concerns. Plug the stove directly into a wall outlet to ensure safe operation.
If the stove overheats, turn it off immediately and unplug it. Allow it to cool down before inspecting for any obstructions or blockages in the air vents. If the issue persists, contact customer support.
Adjust the thermostat by using the control dial or buttons on the stove, usually located on the front or side. Turn the dial to set your desired temperature.
While the stove is designed for safety, it is not advisable to leave any electrical appliance unattended for extended periods. Always ensure the stove is turned off when not in use.
The stove is intended as a supplemental heat source. It is best used to provide additional warmth alongside your primary heating system.
The Dimplex Burgate BRG20 typically comes with a manufacturer's warranty that covers defects in materials and workmanship. For specific warranty details, refer to the warranty card or the manufacturer's website.