Dell Latitude 5310 2-in-1 Setup Guide

To reset the BIOS password, you need to contact Dell Support for assistance. They can provide a master password or guide you through the process after verifying your ownership of the device.
To perform a factory reset, go to Settings > Update & Security > Recovery, then select 'Get started' under 'Reset this PC'. Choose whether to keep or remove your files and follow the prompts to complete the reset.
To increase battery life, reduce screen brightness, close unnecessary applications, disable Bluetooth and Wi-Fi when not in use, and enable power-saving modes. Regularly update your BIOS and drivers as well.
First, ensure that Wi-Fi is enabled. Restart your router and laptop. Update Wi-Fi drivers and ensure the network adapter settings are correctly configured. If issues persist, try connecting to another network to rule out router problems.
Visit the Dell Support website, enter your service tag, and navigate to the Drivers & Downloads section. Download and install the necessary drivers. Alternatively, use Dell Command Update to automate this process.
Check for dirt or smudges on the screen and clean it. Ensure that touch is enabled in settings. Update the touchscreen driver via Device Manager. If issues persist, perform a system restart or restore.
Use an HDMI or USB-C to HDMI adapter to connect the laptop to an external monitor. Once connected, press 'Windows + P' to select the display mode you prefer (Duplicate, Extend, etc.).
Turn off the laptop and disconnect it from power. Use compressed air to remove debris between keys. Clean the surface with a microfiber cloth slightly dampened with isopropyl alcohol. Avoid liquid cleaners and excessive moisture.
Restart your laptop and enter BIOS Setup by pressing F2. Navigate to the Virtualization section and enable Intel Virtualization Technology. Save changes and exit the BIOS.
Ensure the vents are not blocked and clean any dust buildup. Use the laptop on a hard, flat surface. Update the BIOS and thermal management drivers. Consider using a cooling pad to improve airflow.