Bush BFFX60185G User Manual
![Bush BFFX60185G Refrigerator manual cover](/images/bEzBcOdsPgAZzpaJrGZweoCW/thumbs/thumb175x175.webp)
To adjust the temperature, use the control panel located inside the refrigerator. Press the temperature adjustment button until you reach the desired setting.
Ensure that the refrigerator is plugged in and the power is on. Check the temperature settings and make sure the doors are fully closed. Clean the condenser coils and ensure there is adequate ventilation around the unit.
The Bush BFFX60185G is a frost-free model, so manual defrosting is not necessary. However, it is advisable to clean the freezer section occasionally to prevent ice build-up.
Water leaks can be caused by a blocked defrost drain. Check the drain for obstructions and clear any debris. Also, ensure that food items are not obstructing the air vents.
Remove all food and shelves, then clean the interior with a mixture of mild detergent and warm water. Rinse with a clean, damp cloth and dry with a towel before replacing the shelves and food.
To change the light bulb, unplug the refrigerator, remove the light cover, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Check if the refrigerator is level and ensure it is not touching any walls or cabinets. Unusual noises can also be caused by items placed too closely to the fan or vents.
To change the door seal, loosen the screws around the door liner, remove the old seal, and position the new seal in place. Tighten the screws to secure the new seal evenly.
Bad odors can be eliminated by cleaning the interior with baking soda and water. Place an open box of baking soda inside the refrigerator to absorb future odors.
Ensure the door seals are intact, keep the refrigerator well-stocked but not overcrowded, and maintain the recommended temperature settings. Regularly clean the condenser coils to improve efficiency.