AGA Stanley Supreme DF Spare Parts Manual

To start up the cooker for the first time, ensure it is connected to a power source and the gas supply is turned on. Follow the user manual to ignite the burners and set the desired temperature on the control panel. Allow the cooker to preheat before using it for cooking.
Check if the cooker is properly plugged in and the gas supply is on. Ensure the control knobs are correctly set. If the issue persists, consult the troubleshooting section of the manual or contact customer support for assistance.
Use a soft cloth and warm soapy water to clean the enamel surfaces. Avoid using abrasive cleaners or scouring pads that could scratch the finish. Dry thoroughly with a soft towel.
Regularly check the burners and clean them to ensure efficient operation. Inspect the door seals and replace them if they show signs of wear. Schedule an annual service with a qualified technician to ensure optimal performance.
Refer to the control panel settings in the manual. Typically, you can switch modes by pressing the mode button until the desired mode is displayed. Ensure the cooker is off before switching modes.
Verify the temperature setting and allow the oven to preheat fully. Use an oven thermometer to check the accuracy. If there is a discrepancy, consult the manual for calibration instructions or contact a technician.
Use parchment paper or a non-stick cooking spray on the trays before placing food on them. Also, ensure that the trays are clean and free from baked-on residue.
If you smell gas, immediately turn off the cooker and do not use any electrical switches. Open windows for ventilation and contact your gas supplier or a qualified technician to inspect the appliance.
Use the appropriate size of cookware for the burners, keep lids on pots to retain heat, and avoid opening the oven door frequently. Consider using the electric mode for low-energy cooking when possible.
Clean the cooker thoroughly, disconnect it from the power and gas supply, and cover it with a dust sheet. Store in a dry, well-ventilated area to prevent moisture buildup.