AGA Masterchef 100 DF FSD Spare Parts Manual

To clean the oven, use a non-abrasive cleaner and a soft cloth. Avoid using harsh chemicals or steel wool, as they can damage the enamel surface. Regular cleaning after use will help maintain the oven in optimal condition.
First, ensure that the cooker is connected to the gas supply and that the gas valve is open. Check for any blockages in the burner ports and clean them if necessary. If the problem persists, consult a certified technician.
To replace the oven light bulb, first ensure the cooker is switched off and cool. Remove the protective cover inside the oven and unscrew the old bulb. Replace it with a new bulb of the same type and wattage.
It is recommended to perform a thorough cleaning of the oven and burners every month. An annual safety and performance check by a certified technician is also advised to ensure the cooker operates efficiently.
If the oven temperature is not accurate, it may require recalibration. Refer to the user manual for calibration instructions. If recalibration does not resolve the issue, a thermostat check by a professional is recommended.
To set the clock, press the 'Function' button until the clock symbol appears, then use the '+' and '-' buttons to adjust the time. Confirm the setting by pressing the 'Function' button again.
Check that the cooker is properly plugged in and that the circuit breaker has not tripped. If the power supply is intact, there might be an issue with the heating element or thermostat, in which case, contact a technician.
Some noise is normal during operation, such as the sound of the fan or gas flame. However, if you hear unusual or loud noises, it could indicate a problem that requires professional inspection.
To use the timer, select the cooking function and temperature, then press the 'Timer' button. Use the '+' and '-' buttons to set the desired cooking duration. The cooker will automatically switch off when the time elapses.
Yes, the cooker can be converted to LPG. However, this conversion should be performed by a qualified gas engineer to ensure safety and compliance with regulations.