Yealink DD10K Quick Start Guide v2
![Yealink DD10K manual cover](/images/3c06b11e4eafaaba621643fd/thumbs/thumb175x175.webp)
![English English](/static/img/blank.webp)
DECT Dongle Kit DD10K
www.yealink.com
Quick Start Guide(V1.0)
2
DECT dongle kit DD10K helps you turn the SIP-T41S/T42S IP phone to the DECT desk phone (hereinafter referred to as DD phone). After that, you can use the IP phone as a handset for a base station.
The following items are included in your package. If you find anything missing, contact your system administrator.
Assembling the DD10K, as shown below:
To assemble the DD10K: 1. Insert the DD10K into the USB port on the back of the
phone.
Introduction
Package Contents
Quick Start GuideDD10K
Assembling the DD10K
3
DD Phone Mode
Before using a IP phone as a DECT desk phone, you should enable the DD phone mode first. To enable the DD phone mode when the IP phone is powered off: 1. Assemble the DD10K. 2. Power on the IP phone. The DD phone mode is enabled automatically after the IP phone is started up.
If you purchase the W41P package, the T41S DD phone is registered to the W60B by default, so you can skip the Registration process. If you purchase the DD10K package, you should manually register the DD phone to one Base station.
Registration
You can register up to 8 DD phones (for W60B) or 5 DD phones (for W52P) to one base station. Each DD phone can be registered to only one base station. Before registering the DD phone, make sure the base station is in registration mode (long press on the base station till the registration LED flashes). To register the DD phone when the phone screen prompts Unregistered!, do one of the following: Press the Reg soft key to register quickly. a.Do one of the following:
Press the OK soft key, and then select Register Handset.
Press , and then select Settings->Registration-> Register Handset.
The IP phone begins searching the base station. b. Press the OK soft key after searching a base station
successfully.
Getting Started
4
c. Enter the base station PIN (default: 0000), and then press the OK soft key to complete registration.
Call Mute and Un-mute
Press to mute the microphone during a call. Press again to un-mute the call.
Call Hold and Resume
To place a call on hold: Press the Hold soft key during an active call. To resume the call, do one of the following: If ther e is only one call on hold, press the Resume soft key. If there is more than one call on hold, press or to select the desired call, and then press the Resume soft key.
Call Transfer
You can transfer a call in the following ways: Blind Transfer 1. Press the Transfer soft key during an active call. The call is
placed on hold. 2. Enter the number you want to transfer to. 3. Press the Transfer soft key. Semi-Attended Transfer 1. Press the Transfer soft key during an active call. The call is
placed on hold. 2. Enter the number you want to transfer to, and then press
.
Note: If the DD phone is registered to the base station successfully, the phone screen prompts Subscribed Succeed.
I f the DD phone prompts Searching for Base, check if your base station is powered on or not.
Basic Call Features
5
3. Press the Transfer soft key when you hear the ring-back tone.
Attended Transfer 1. Press the Transfer soft key during an active call. The call is
placed on hold. 2. Enter the number you want to transfer to, and then press
. 3. Press the Transfer soft key when the second party
answers.
Call Forward
To enable call forward: 1. Press the Menu soft key when the phone is idle, and then
select Features->Call Forward. 2. Select a desired account. 3. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally. Busy Forward----Incoming calls are forwarded when the phone is busy. No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
4. Enter the number you want to forward to. For No Answer Forward, press or to select the desired ring time to wait before forwarding from the After Ring Time field.
5. Press the Save soft key to accept the change.
Conference
1. Press the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key again when the second party answers. All parties are now joined in the conference.
4. Press the End Call soft key to disconnect all parties.
6
Speed Dial
To configure a speed dial key: 1. Press the Menu soft key when the phone is idle, and then select
Features->DSS Keys. 2. Select the desired DSS key, and then press the Enter soft key. 3. Select SpeedDial from the Type field, select the desired line
from the Account ID field, enter a label in the Label field and then enter the number in the Value field.
4. Press the Save soft key to accept the change. To use the speed dial key: 1. Press the speed dial key to dial out the preset number.
Handset Name
To rename the handset: 1. Press the Menu soft key when the phone is idle, and then select
Settings->Basic Settings->Phone Name. 2. Edit the value in the Phone Name field. 3. Press the Save soft key to accept the change.
Call History
1. Press the History soft key when the phone is idle, press or to scroll through the list.
2. Select an entry from the list, you can do the following: Press the Send soft key to call the entry. Press the Delete soft key to delete the entry from the list. Press the Option soft key, do the following: Select Detail to view detailed information about the entry.
Select Add to Contact to add the entry to the local directory.
Select Add to Blacklist to add the entry to the blacklist. Select Delete All to delete all entries from the list.
Customizing Your Phone
7
Contact Directory To add a contact: 1. Press the Directory soft key when the phone is idle. 2. Press the Add soft key to add a contact. 3. Enter a unique contact name in the Name field and
contact numbers in the corresponding fields. 4. Press the Add soft key to accept the change. To edit a contact: 1. Press the Directory soft key when the phone is idle. 2. Press or to select the desired contact, press the
Option soft key and then select Detail from the prompt list.
3. Edit the contact information. 4. Press the Save soft key to accept the change. To delete a contact: 1. Press the Directory soft key when the phone is idle, and
then select All Contacts. 2. Press or to select the desired contact, press the
Option soft key and then select Delete from the prompt list.
3. Press the OK soft key when the phone screen prompts Delete selected item?.
Volume Adjustment
Press during a call to adjust the receiver volume of the handset/speakerphone/headset.
Press when the phone is idle or ringing to adjust the ringer volume.
Ring Tones
1. Press the Menu soft key when the phone is idle, and then select Settings->Basic Settings->Sound->Ring Tones.
2. Press or to select Common or the desired account , and then press the Enter soft key.
3. Press or to select the desired ring tone. 4. Press the Save soft key to accept the change.
About Yealink
Yealink (Stock Code: 300628) is a global leading unified communication (UC) terminal solution provider that primarily offers video conferencing systems and voice communication solutions. Founded in 2001, Yealink leverages its independent research and development and innovation to pursue its core mission: Easy collaboration, high productivity. The companys high-quality UC terminal solutions enhance the work efficiency and competitive advantages of its customers in over 100 countries. Yealink is the worlds second-largest SIP phone provider and is number one in the China market.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket. yealink.com) to submit all your technical issues.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Addr: 309, 3th Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R. China
Copyright2018 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD.