Worcester LPG 27Ri Compact 2014 User Instructions
![Worcester LPG 27Ri Compact 2014 Boiler manual cover](/images/ayMTOZcEqbVQnkeunglFQIwH/thumbs/thumb175x175.webp)
To reset your Worcester LPG 27Ri Compact 2014 Boiler, press the reset button on the control panel. Hold it for about 3 seconds until the reset light stops flashing.
Check that the boiler is receiving power and that the thermostat is correctly set. Ensure the pressure gauge is within normal range (1-1.5 bar) and there are no error codes displayed.
It is recommended to service your boiler annually to ensure it operates efficiently and safely.
A flashing blue light on your Worcester LPG 27Ri Compact 2014 Boiler typically indicates a fault. Refer to the user manual for specific error codes and troubleshooting steps.
To adjust the water temperature, use the control knob on the boiler's front panel. Turn it clockwise to increase the temperature and counterclockwise to decrease it.
If the pressure drops below 1 bar, you may need to repressurize the system. This can be done by opening the filling loop valves until the pressure gauge reads between 1 and 1.5 bar.
No, the boiler requires electricity to operate. It will not function during a power cut.
The ideal pressure range for the Worcester LPG 27Ri Compact 2014 Boiler is typically between 1 and 1.5 bar.
A loud banging noise could be due to a process known as kettling, caused by limescale buildup or trapped air. It is advisable to contact a qualified engineer to resolve the issue.
To improve efficiency, regularly service the boiler, insulate exposed pipes, and ensure your home is well-insulated to reduce heat loss.