Worcester LPG 25Si 2009 User Instructions

To reset your Worcester LPG 25Si boiler, locate the reset button on the front panel. Press and hold the button until the reset light turns off, indicating a successful reset.
A flashing blue light typically signals a fault in the boiler. Check the boiler manual for specific fault codes, or contact a qualified technician for assistance.
It is recommended to service your Worcester LPG 25Si boiler annually to ensure optimal performance and safety.
If the boiler pressure is too low, you can increase it by adding water to the system via the filling loop. Refer to the manual for detailed instructions, or contact a professional if unsure.
Banging noises could be due to air in the system or a faulty component. Bleed your radiators to remove air, and if the problem persists, consult a heating engineer.
To bleed radiators, turn off the heating system, use a radiator key to open the bleed valve slightly, and allow trapped air to escape until water flows steadily. Close the valve and wipe any spills.
Error code EA indicates a lack of flame detection. Check the gas supply and ensure the boiler is properly vented. If the issue persists, contact a qualified technician.
Yes, you can use a smart thermostat with your Worcester 25Si boiler, but ensure it is compatible. Consult the thermostat's installation guide or a professional for proper setup.
To adjust the heating temperature, use the central heating temperature control knob on the boiler's front panel. Turn it clockwise to increase and counterclockwise to decrease the temperature.
If your boiler is leaking, switch off the boiler and water supply. Contact a certified heating engineer to identify and fix the leak promptly.