Whirlpool WOC75EC0HS Control Guide
![Whirlpool WOC75EC0HS Oven manual cover](/images/kpHWKBrdydevaWErJzONMZeP/thumbs/thumb175x175.webp)
To set the Whirlpool WOC75EC0HS oven to convection bake mode, press the 'Convection Bake' button, use the number pad to enter the desired temperature, and then press 'Start' to begin preheating.
Check if the oven is plugged in and that the circuit breaker is not tripped. Ensure the door is fully closed. If these are all correct, a service technician may be needed to inspect the heating elements.
Use the self-cleaning function by removing all racks, selecting 'Self Clean' on the display, and following the on-screen instructions. For manual cleaning, use a damp cloth and mild detergent.
Keep the touch screen free of dirt and grease by cleaning it with a soft, damp cloth. Avoid using abrasive cleaners or sharp tools that could damage the screen.
To perform a hard reset, unplug the oven from the power source or switch off the circuit breaker for at least one minute before restoring power.
Error codes indicate specific issues. Refer to the user manual for code meanings. Common solutions include resetting the oven or ensuring connections are secure. If persistent, contact Whirlpool customer support.
Aluminum foil can be used to line baking trays for easy cleanup but should not cover oven racks or vents, as this can impede airflow and affect cooking performance.
Ensure the oven is off and cool. Remove the glass bulb cover by turning it counterclockwise, replace the bulb with a new 40-watt appliance bulb, and reinstall the cover.
Check for obstructions around the door and ensure the hinges are not damaged. If the problem persists, tightening the screws on the door or consulting a technician may be required.
Press 'Cook Time', enter the desired cooking duration, then press 'Delay Start'. Enter the time you want the cooking to begin and press 'Start'. The oven will start cooking at the set time.