Westinghouse WHE6170BB Uesr Manual
![Westinghouse WHE6170BB Fridge manual cover](/images/gaooAXHERtITWXuhGUIzqWTj/thumbs/thumb175x175.webp)
To adjust the temperature, locate the control panel inside the fridge. Use the up and down buttons to set your desired temperature. The recommended setting for the fridge is 3°C, and -18°C for the freezer.
First, ensure that the fridge is plugged in and the power is on. Check the temperature settings and adjust if necessary. Clean the condenser coils if they are dirty, and ensure the vents inside are not blocked. If the problem persists, consult a professional technician.
To prevent frost build-up, ensure that the freezer door seals are intact and close properly. Avoid leaving the door open for extended periods and do not overload the freezer, which can hinder proper air circulation.
Unplug the fridge before cleaning. Remove all food items and shelves. Use a mixture of mild soap and warm water to clean the interior surfaces. Rinse with clean water and dry with a soft cloth before replacing shelves and food.
It's recommended to replace the water filter every 6 months to ensure optimal performance and water quality. Refer to the user manual for instructions on how to replace the filter.
Unusual noises can be caused by several factors, including improper leveling, items inside the fridge vibrating, or the condenser fan. Ensure the fridge is level and check for any loose items. If the noise persists, it may need a technician's inspection.
During a power outage, keep the fridge and freezer doors closed to maintain the cold temperature. A closed fridge can keep food cold for about 4 hours, while a full freezer maintains its temperature for approximately 48 hours.
To change the light bulb, first unplug the fridge. Locate the light cover inside the fridge, remove it, and unscrew the old bulb. Replace it with a new bulb of the same wattage and reattach the cover.
It's not recommended to install the fridge in a garage or outdoor area where temperatures can fluctuate significantly. The fridge is designed to operate within a specific temperature range, typically between 10°C to 43°C.
To perform a factory reset, unplug the fridge and leave it unplugged for about 5 minutes. Plug it back in and the settings should revert to factory defaults. Consult the user manual if further instructions are needed.