Team Losi Racing TLR99059 8IGHT-T Start Box Manual
![Team Losi Racing TLR99059 8IGHT-T Race Kit manual cover](/images/YNZXSNQCkrdvUQJqPzHqHruI/thumbs/thumb175x175.webp)
Start by organizing all the suspension components. Follow the manual step-by-step, ensuring that each part is correctly oriented and tightened. Pay special attention to the shock absorbers and make sure they are filled with oil to the recommended level.
After a race, clean the vehicle thoroughly to remove dirt and debris. Check all moving parts for wear and tear, lubricate the bearings, and inspect the drivetrain for any signs of damage. Also, verify that all screws and nuts are tightened.
First, check for any obstructions in the steering mechanism. Ensure that the servo is functioning correctly and that the servo saver is not too loose. Inspect the linkages for any signs of bending or damage.
For bumpy tracks, consider using softer suspension settings and increase the ride height slightly. Use softer springs and adjust the shock oil to a lighter viscosity for better absorption of the bumps.
To adjust the gear mesh, loosen the motor mount screws and gently slide the motor until the gears have a slight amount of play. The gears should not be too tight or too loose. Re-tighten the screws once the mesh is correct.
Check the throttle linkage and ensure it is not binding. Inspect the clutch and make sure it is engaging properly. Verify that the ESC settings are correct and that the battery is fully charged.
On high-grip surfaces, stiffen the suspension by using firmer springs and thicker shock oil. Consider lowering the ride height and adjusting the camber and toe settings to optimize tire contact with the track.
Use a soft brush or compressed air to remove loose dirt and debris. Clean the chassis with a damp cloth and mild detergent if necessary. Avoid using water on electronic components and lubricate all moving parts after cleaning.
The frequency of tire replacement depends on track conditions and driving style. Inspect the tires regularly for wear patterns and replace them when the tread is significantly worn or if the tires are damaged.
Ensure that the battery is properly charged before use and avoid over-discharging. Store batteries at the recommended voltage when not in use and keep them in a cool, dry place. Regularly balance charge LiPo batteries for optimal performance.