Subaru RG3200iS Parts Manual
![Subaru RG3200iS Generator manual cover](/images/GohXNTzWmYUwQRNlTWpLOrGi/thumbs/thumb175x175.webp)
It is recommended to use SAE 10W-30 oil for the Subaru RG3200iS generator for optimal performance in most climates.
The oil should be changed after the first 20 hours of operation, and then every 100 hours of use or annually, whichever comes first.
Ensure the generator is on a flat surface, turn the fuel valve to the 'On' position, set the choke to 'Closed' if cold, and pull the starter rope gently until resistance is felt, then pull briskly.
Check the fuel level, ensure the fuel valve is open, inspect the spark plug for wear or damage, and verify that the oil level is adequate.
The Subaru RG3200iS generator has a running wattage of 2,800 watts.
Routinely check and clean the air filter, change the oil, inspect the spark plug, and ensure that all bolts and nuts are tightened securely.
Check the circuit breaker and reset it if necessary. Also, ensure that all connections are secure and inspect the power cables for any visible damage.
No, it is not safe to run the generator indoors due to the risk of carbon monoxide poisoning. Always operate it in a well-ventilated outdoor area.
Drain the fuel, change the oil, remove the spark plug and add a few drops of oil into the cylinder, then pull the starter rope to distribute the oil before storing in a dry place.
Stop the generator immediately, check for any loose parts, inspect the muffler and air filter, and consult the manual or a professional if the noise persists.