Stihl SG 10 Instruction Manual
![Stihl SG 10 manual cover](/images/3c353533cf7aa35926a3e267/thumbs/thumb175x175.webp)
To assemble the Stihl SG 10, first attach the spray wand to the spray gun. Then, connect the hose to the tank. Ensure all connections are tight to prevent leaks.
The Stihl SG 10 is designed for use with water-based solutions only. Avoid using corrosive or flammable liquids.
If the nozzle is clogged, remove it and soak it in warm, soapy water. Use a soft brush to clear any debris. Reattach and test the spray functionality.
After use, empty the tank and rinse it with clean water. Pump clean water through the system to clear the hose and nozzle. Store in a cool, dry place.
Adjust the spray pattern by twisting the nozzle tip. A tighter twist will produce a fine mist, while loosening it will create a wider spray pattern.
Low pressure can be caused by a loose connection, a clogged nozzle, or air trapped in the pump. Check all connections, clean the nozzle, and ensure the pump is primed.
Yes, the Stihl SG 10 can be used with water-based disinfectants. Ensure that the disinfectant is non-corrosive and properly diluted.
Regular maintenance should include cleaning after every use and checking for wear and tear every few months, depending on frequency of use.
Check for loose connections or damaged seals. Tighten all fittings and replace any worn parts if necessary.
No, it is not recommended to store liquids in the sprayer for extended periods. Always empty and clean the tank after use to prevent damage.