Stihl SE 62 Instruction Manual
![Stihl SE 62 manual cover](/images/a63bf20924419e1012f3bbaf/thumbs/thumb175x175.webp)
To assemble the Stihl SE 62, start by attaching the hose to the suction inlet. Connect the extension tubes to the hose, and then attach your desired nozzle. Ensure all connections are tight before use.
Check if the filter bag is full or if the filter is clogged. Replace or clean them as needed. Also, inspect the hose for any blockages that might restrict airflow.
Regularly check the filter for dirt and debris. Rinse washable filters with water and let them dry completely before reinserting. Replace non-washable filters as per the manufacturer's recommendations.
Store the Stihl SE 62 in a dry and clean area. Coil the hose and power cord neatly to prevent damage. Ensure the vacuum is emptied of debris and cleaned before storage.
Open the vacuum cleaner housing, remove the old filter bag, and dispose of it properly. Insert a new filter bag, ensuring it is securely attached to the inlet, and close the housing.
Unusual noises may indicate a blockage or a worn-out part. Check for obstructions in the hose or tubes, and inspect the motor and fan for any signs of wear or damage.
Yes, the Stihl SE 62 is designed for both wet and dry vacuuming. Ensure you switch to the appropriate filter for wet vacuuming and empty the tank promptly after use to prevent mold and odors.
Service frequency depends on usage. For regular use, inspect filters and hoses monthly, and replace or clean as needed. A professional service check is recommended annually.
If the power cord is damaged, discontinue use immediately to avoid electrical hazards. Contact a certified technician or Stihl service center for replacement.
Use a damp cloth to wipe the exterior surfaces of the Stihl SE 62. Avoid using harsh chemicals or abrasive materials that can damage the surface.