Stihl RG-KM Instruction Manual
![Stihl RG-KM manual cover](/images/c2c1a881f9bf324890dd2e8f/thumbs/thumb175x175.webp)
To attach the Stihl RG-KM to a KombiMotor, align the drive tubes, insert the attachment, and tighten the coupling securely with the knob. Always ensure the attachment is locked in place before use.
Regularly inspect the cutting blade for any damage or dullness. Sharpen the blade using a suitable file or grinder, ensuring you maintain the original angle of the blade. Clean the blade after each use to prevent rust.
If the RG-KM is not cutting effectively, check if the blade is dull or damaged. Sharpen or replace the blade if necessary. Ensure the attachment is properly connected to the KombiMotor and check for any obstructions in the blade area.
Store the Stihl RG-KM in a dry, secure location away from direct sunlight. Ensure the blade cover is in place to prevent accidental contact with the blade. Keep the attachment away from children and unauthorized users.
After use, clean the Stihl RG-KM by removing any grass or debris from the blade and housing. Use a soft brush or cloth and avoid using water on the motor or electrical parts. Ensure the attachment is dry before storing.
Excessive vibration may be due to an unbalanced or damaged blade. Check the blade for damage and balance by ensuring it is mounted correctly. Replace damaged blades and tighten any loose components.
It is not recommended to use the Stihl RG-KM in wet conditions as it may lead to safety hazards and damage to the equipment. Always ensure the environment is dry and safe before operating the tool.
Turn off the KombiMotor and disconnect the RG-KM from the power source. Carefully remove any obstructions from the blade area. Check for any damage before resuming operation.
Inspect the Stihl RG-KM before each use for any signs of wear or damage. A thorough inspection and maintenance routine should be conducted every 25 hours of operation or at least once a season.
Yes, you can sharpen the Stihl RG-KM blade at home using a suitable sharpening tool. Ensure you follow the manufacturer's guidelines for blade angle and sharpness, and wear protective gloves during the process.