Stihl RE 110 PLUS Instruction Manual
![Stihl RE 110 PLUS manual cover](/images/cb25c7d30832a4c41e86489d/thumbs/thumb175x175.webp)
To assemble the Stihl RE 110 PLUS, start by attaching the high-pressure hose to the spray gun and the unit. Then, connect the water supply hose to the unit's water inlet. Finally, ensure that the nozzle is securely attached to the spray gun. Refer to the user manual for detailed assembly instructions.
Regular maintenance for the Stihl RE 110 PLUS includes checking and cleaning the water filter, inspecting the high-pressure hose and connections for leaks, and ensuring the nozzle is clean. It's also important to check the power cable for any damage. Perform these checks before each use.
If experiencing low pressure, check that the water supply is adequate and the hose is not kinked. Ensure the nozzle is not clogged and is properly attached. Additionally, inspect the water filter for blockages and clean it if necessary.
First, ensure the unit is plugged into a working power outlet. Check the power cable for damage. Make sure the ON/OFF switch is in the correct position. If the unit still doesn't start, consult the troubleshooting section in the user manual.
To store the Stihl RE 110 PLUS, first turn off and unplug the unit. Release any pressure by squeezing the trigger gun. Drain the water from the hose and unit. Store the unit in a dry, frost-free place, coiling the hose and power cable neatly.
Yes, the Stihl RE 110 PLUS is designed to work with detergents. Use only recommended detergents and follow the instructions for dilution. Attach the detergent bottle to the spray lance or use the detergent tank if equipped.
To clean the nozzle, remove it from the spray lance and use the included cleaning needle to clear any blockages. Rinse the nozzle under running water to remove debris. Reattach the nozzle securely before use.
Always wear protective eyewear and gloves when operating the pressure washer. Do not point the spray gun at people or animals. Ensure that the power cable is kept clear of the water. Read the safety instructions in the manual before use.
To replace the high-pressure hose, ensure the unit is turned off and unplugged. Detach the old hose from both the spray gun and the pressure washer. Attach the new hose by securely fastening it to the spray gun and the unit's outlet.
Check all connections to ensure they are tight and not damaged. Inspect the high-pressure hose and seals for wear or damage. Replace any faulty components. If the problem persists, consult the service manual or contact a professional technician.