Stihl RB 200 Instruction Manual
![Stihl RB 200 manual cover](/images/bd821825a52c9b01b1b4e4bc/thumbs/thumb175x175.webp)
To start the Stihl RB 200, first ensure that the water supply is connected and turned on. Set the choke to the 'cold start' position, turn the engine switch to 'on', and pull the starter cord briskly. Once the engine starts, move the choke to the 'run' position.
Check fuel levels and ensure fresh fuel is used. Verify the spark plug is clean and properly connected. Ensure the engine switch is 'on' and the choke is set correctly. If problems persist, consult the user manual or contact a Stihl service center.
Change the oil after the first 5 hours of use, and subsequently every 50 hours or annually, whichever comes first. Use SAE 10W-30 oil for optimal performance.
To winterize the Stihl RB 200, drain all water from the pump and hoses. Add a pump saver antifreeze solution through the pump inlet. Store the unit in a dry, frost-free environment.
Use clean, fresh unleaded gasoline with a minimum octane rating of 87 and no more than 10% ethanol content. Always avoid gasoline with higher ethanol content to prevent engine damage.
Low pressure can result from a clogged nozzle, air in the hose, or a blocked water inlet screen. Clean the nozzle and screen, and ensure all connections are tight. Purge air from the system by running water through it before starting the engine.
To clean the nozzles, remove them from the spray wand, and use a small nozzle cleaning tool or needle to remove debris. Rinse with clean water before reattaching to the wand.
Regular maintenance includes checking and changing the oil, cleaning the air filter, inspecting and cleaning the spark plug, and ensuring the water inlet screen and nozzles are free of debris.
To replace the spark plug, disconnect the spark plug boot, and use a spark plug wrench to remove the old plug. Install a new, compatible spark plug, ensuring it is properly gapped, and reattach the boot.
Yes, you can use a pressure washer detergent. Use the onboard detergent tank for convenience. Fill the tank with the recommended detergent, set the spray wand to low pressure, and apply the detergent evenly on the surface.