Contents

1 Introduction
2 Guide to Using this Manual
- 2.1 Signal Words
- 2.2 Symbols in Text
3 Main Parts
- 3.1 Chain Saw and Battery
4 Safety Symbols on the Products
- 4.1 Chain Saw
- 4.2 Battery
5 General Power Tool Safety Warnings
- 5.1 Introduction
- 5.2 Work Area Safety
- 5.3 Electrical Safety
- 5.4 Personal Safety
- 5.5 Power Tool Use and Care
- 5.6 Battery Tool Use and Care
- 5.7 Service
- 5.8 General Chain Saw Safety Warnings
- 5.9 Causes and Operator Prevention of Kickback
6 IMPORTANT SAFETY INSTRUCTIONS
- 6.1 Intended Use
- 6.2 Operator
- 6.3 Personal Protective Equipment
- 6.4 Chain Saw
- 6.5 Using the Chain Saw
  - 6.5.1 Before Operation
  - 6.5.2 Holding and Controlling the Chain Saw
  - 6.5.3 Working Conditions
  - 6.5.4 Operating Instructions
7 Kickback and Other Reactive Forces
- 7.1 Reactive Forces
- 7.2 Kickback
  - 7.2.1 Kickback
  - 7.2.2 Chain Saw Kickback Standards
  - 7.2.3 Devices for Reducing the Risk of Kickback Injury
  - 7.2.4 To Avoid Kickback
- 7.3 Pull-in
- 7.4 Pushback
8 Basic Working Technique
- 8.1 Intended Uses
- 8.2 Pruning
- 8.3 Cutting Branches under Tension
- 8.4 Blocking - Removing Sections from a Standing Tree
  - 8.4.1 Conventional Notch
  - 8.4.2 Back Cut
9 Battery Safety
- 9.1 Warnings and Instructions
10 Maintenance, Repair and Storage
- 10.1 Warnings and Instructions
11 Before Starting Work
- 11.1 Preparing the Chain Saw for Operation
12 Charging the Battery
- 12.1 Setting up the Charger
- 12.2 Charging
13 LED Diagnostics and Acoustic Signals
- 13.1 STIHL AP Battery
  - 13.1.1 Battery Status
  - 13.1.2 Power Tool Status
  - 13.1.3 Charge Status
- 13.2 STIHL AR Backpack Battery
  - 13.2.1 Battery Status
  - 13.2.2 Power Tool Status
  - 13.2.3 Charge Status
14 STIHL AR L Backpack Battery
- 14.1 Adjusting the Battery Harness to Suit the Operators Height
- 14.2 Positioning the Connecting Cord
- 14.3 Putting on the Harness
15 STIHL AR Backpack Battery
- 15.1 Positioning and Adjusting the Connecting Cord
- 15.2 Putting on the Harness
16 Assembling the Chain Saw
- 16.1 Cutting Attachment
- 16.2 Mounting and Removing the Guide Bar and Chain
  - 16.2.1 Mounting the Guide Bar and Chain
  - 16.2.2 Removing the Guide Bar and Chain
- 16.3 Tensioning the Chain
- 16.4 Lubricating the Saw Chain and Guide Bar
  - 16.4.1 Bar and Chain Lubricant
  - 16.4.2 Filling the Chain Oil Tank
17 The Chain Brake
- 17.1 Engaging the Chain Brake
- 17.2 Disengaging the Chain Brake
- 17.3 Maintaining the Chain Brake
18 Inserting and Removing the Battery
- 18.1 Inserting the Battery
- 18.2 Removing the Battery
19 Switching the Chain Saw On and Off
- 19.1 Switching On
- 19.2 Switching Off
20 Checking the Chain Saw
- 20.1 Checking the Operation of the Chain Brake
- 20.2 Testing the Controls
- 20.3 Testing Chain Lubrication
21 After Finishing Work
- 21.1 Preparing for Transportation or Storage
22 Transporting the Chain Saw and Battery
- 22.1 Chain Saw
- 22.2 Battery
23 Storing the Chain Saw and Battery
- 23.1 Chain Saw
- 23.2 Battery
24 Cleaning
- 24.1 Cleaning the Chain Saw and Battery
- 24.2 Cleaning the Guide Bar and Saw Chain
25 Inspection and Maintenance
- 25.1 Inspecting and Maintaining the Chain Saw
- 25.2 Inspecting and Maintaining the Chain Sprocket
- 25.3 Inspecting and Maintaining the Guide Bar
- 25.4 Inspecting, Maintaining and Sharpening the Saw Chain
26 Troubleshooting Guide
- 26.1 Chain Saw and Battery
27 Specifications
- 27.1 STIHL MSA 161 T
- 27.2 Chain Sprockets
- 27.3 Minimum Groove Depth of Guide Bars
- 27.4 Depth Gauge Setting
- 27.5 Symbols on the Chain Saw
- 27.6 Engineering Improvements
- 27.7 FCC 15 Compliance Statement
28 Combinations of Guide Bars and Saw Chains
- 28.1 STIHL MSA 161 T
29 Replacement Parts and Equipment
- 29.1 Genuine STIHL Replacement Parts
30 Disposal
- 30.1 Disposal of the Power Tool
- 30.2 Battery Recycling
31 Limited Warranty
- 31.1 STIHL Incorporated Limited Warranty Policy
32 Trademarks
- 32.1 Registered Trademarks
- 32.2 Common Law Trademarks
33 Addresses
- 33.1 STIHL Incorporated
1 Introduccin
2 Acerca de este manual de instrucciones
- 2.1 Palabras identificadoras
- 2.2 Smbolos en el texto
3 Componentes importantes
- 3.1 Motosierra y batera
4 Smbolos de seguridad en los productos
- 4.1 Motosierra
- 4.2 Batera
5 Advertencias generales de seguridad para herramientas motorizadas
- 5.1 Introduccin
- 5.2 Seguridad en la zona de trabajo
- 5.3 Seguridad elctrica
- 5.4 Seguridad personal
- 5.5 Uso y cuidado de la herramienta motorizada
- 5.6 Uso y cuidado de la herramienta con batera
- 5.7 Mantenimiento
- 5.8 Advertencias de seguridad generales para motosierras
- 5.9 Causas del contragolpe y medidas de prevencin
6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- 6.1 Uso previsto
- 6.2 Operador
- 6.3 Equipos de proteccin personal
- 6.4 Motosierra
- 6.5 Uso de la motosierra
  - 6.5.1 Antes de usar
  - 6.5.2 Sujecin y control de la motosierra
  - 6.5.3 Condiciones de trabajo
  - 6.5.4 Instrucciones de manejo
7 Contragolpe y otras fuerzas reactivas
- 7.1 Fuerzas reactivas
- 7.2 Contragolpe
  - 7.2.1 Contragolpe
  - 7.2.2 Normas para el contragolpe de las motosierras
  - 7.2.3 Dispositivos para reducir el riesgo de lesiones por contragolpe
  - 7.2.4 Para evitar el contragolpe
- 7.3 Tirones
- 7.4 Rechazo
8 Tcnica de trabajo bsica
- 8.1 Usos previstos
- 8.2 Poda
- 8.3 Corte de ramas en tensin
- 8.4 Bloqueo y retirada de secciones de un rbol en pie
  - 8.4.1 Entalladura convencional
  - 8.4.2 Corte trasero
9 Seguridad de la batera
- 9.1 Advertencias e instrucciones
10 Mantenimiento, reparacin y almacenamiento
- 10.1 Advertencias e instrucciones
11 Antes de empezar a trabajar
- 11.1 Preparacin de la motosierra para el funcionamiento:
12 Carga de la batera
- 12.1 Preparacin del cargador para el funcionamiento
- 12.2 Carga
13 Diagnstico por LED y seales acsticas
- 13.1 Batera AP de STIHL
  - 13.1.1 Estado de la batera
  - 13.1.2 Estado de la herramienta motorizada
  - 13.1.3 Estado de carga
- 13.2 Batera de mochila STIHL AR
  - 13.2.1 Estado de la batera
  - 13.2.2 Estado de la herramienta motorizada
  - 13.2.3 Estado de carga
14 Batera de mochila STIHL AR L
- 14.1 Ajuste del arns de la batera conforme a la altura del operador
- 14.2 Colocacin del cordn de conexin
- 14.3 Colocacin del arns
15 Batera de mochila STIHL AR
- 15.1 Colocacin y ajuste del cordn de conexin
- 15.2 Colocacin del arns
16 Armado de la motosierra
- 16.1 Accesorio de corte
- 16.2 Montaje y retiro de la espada y la cadena de aserrado
  - 16.2.1 Montaje de la espada y la cadena
  - 16.2.2 Retiro de la espada y la cadena
- 16.3 Tensado de la cadena
- 16.4 Lubricacin de la cadena de aserrado y de la espada
  - 16.4.1 Lubricante de espadas y cadenas
  - 16.4.2 Llenado del tanque de aceite de la cadena
17 El freno de cadena
- 17.1 Accionamiento del freno de la cadena
- 17.2 Cmo soltar el freno de la cadena
- 17.3 Mantenimiento del freno de la cadena
18 Colocacin y extraccin de la batera.
- 18.1 Colocacin de la batera
- 18.2 Extraccin de la batera
19 Encendido y apagado de la motosierra
- 19.1 Encendido
- 19.2 Apagado
20 Revisin de la motosierra
- 20.1 Control del funcionamiento del freno de la cadena
- 20.2 Prueba de los controles
- 20.3 Comprobacin de la lubricacin de la cadena
21 Despus de completar el trabajo
- 21.1 Preparacin para el transporte o el almacenamiento
22 Transporte de la motosierra y de la batera
- 22.1 Motosierra
- 22.2 Batera
23 Almacenamiento de la motosierra y de la batera
- 23.1 Motosierra
- 23.2 Batera
24 Limpieza
- 24.1 Limpieza de la motosierra y de la batera
- 24.2 Limpieza de la espada y la cadena de aserrado
25 Inspeccin y mantenimiento
- 25.1 Inspeccin y mantenimiento de la motosierra
- 25.2 Revisin y mantenimiento del pin de cadena
- 25.3 Inspeccin y mantenimiento de la espada
- 25.4 Inspeccin, mantenimiento y afilado de la cadena de aserrado
26 Gua de solucin de problemas
- 26.1 Motosierra y batera
27 Especificaciones
- 27.1 STIHL MSA 161 T
- 27.2 Piones de cadena
- 27.3 Profundidad de ranura mnima para las espadas
- 27.4 Ajuste de calibrador de profundidad
- 27.5 Smbolos en la motosierra
- 27.6 Mejoramientos tcnicos
- 27.7 Declaracin de cumplimiento con norma FCC 15
28 Combinaciones de espadas y cadenas de aserrado
- 28.1 STIHL MSA 161 T
29 Piezas y equipos de repuesto
- 29.1 Piezas de repuesto originales de STIHL
30 Eliminacin
- 30.1 Desecho de la herramienta motorizada
- 30.2 Reciclado de las bateras
31 Garanta limitada
- 31.1 Poltica de garanta limitada de STIHL Incorporated
32 Marcas comerciales
- 32.1 Marcas comerciales registradas
- 32.2 Marcas comerciales por ley comn
33 Direcciones
- 33.1 STIHL Incorporated

Stihl MSA 161 T Instruction Manual

Pages 132

Year 2020

Language(s)

of 132

Instruction Manual

132 pages

Instruction Manual

124 pages

Stihl MSA 161 T Specification

The Stihl MSA 161 T is a professional-grade battery-powered chainsaw designed for precision and efficiency in tree maintenance tasks. It is engineered to offer a quiet yet powerful solution for arborists and landscape professionals. The chainsaw is powered by a 36-volt lithium-ion battery, providing ample energy for prolonged use while ensuring zero emissions and reduced noise levels, making it ideal for use in noise-sensitive areas.

The MSA 161 T features a compact and lightweight design, weighing just 2.1 kg (without battery), which enhances maneuverability and reduces operator fatigue during extended periods of use. Its cutting speed reaches up to 16 meters per second, ensuring efficient and clean cuts. The chainsaw is equipped with a ¼” PM3 saw chain, known for its low vibration and precise cutting performance, contributing to its overall safety and user comfort.

To enhance usability, the MSA 161 T incorporates an ergonomic top handle design, making it well-suited for in-tree work and other professional applications. The chain tensioning system allows for easy and tool-free adjustments, ensuring optimal chain tension at all times. Additionally, the chainsaw features a QuickStop Super chain brake system for enhanced safety, automatically stopping the chain in specific kickback situations.

The Stihl MSA 161 T is compatible with the Stihl AP battery system, offering versatility and extended runtime options depending on the battery capacity selected. Its design prioritizes easy maintenance with an accessible oil tank and a translucent oil tank window for convenient oil level monitoring. Overall, the MSA 161 T combines precision, power, and eco-friendly operation, making it a top choice for professionals seeking a reliable and efficient tool for demanding tree care tasks.

Stihl MSA 161 T F.A.Q.

How do I properly tension the chain on my Stihl MSA 161 T?

To tension the chain, first ensure the saw is turned off and the battery is removed. Then, use the combination wrench to loosen the bar nuts slightly. Adjust the tensioning screw until the chain fits snugly against the guide bar but can still be moved by hand. Tighten the bar nuts securely afterwards.

What is the recommended bar and chain oil for the Stihl MSA 161 T?

Stihl recommends using their proprietary bar and chain oil, but any high-quality, non-detergent oil designed for chainsaws can be used. Ensure the oil has good adhesive properties to prevent it from flying off the chain.

How can I troubleshoot my Stihl MSA 161 T if it doesn't start?

First, check that the battery is fully charged and properly inserted. Ensure the chain brake is disengaged and that the trigger switch is functioning. If the saw still doesn't start, inspect the contacts for corrosion or damage and clean them if necessary.

How often should I sharpen the chain on my Stihl MSA 161 T?

The chain should be sharpened every time you refuel or after approximately 2-3 hours of use. Regular sharpening ensures efficient cutting and prolongs the life of the chain.

What maintenance steps should I follow for the Stihl MSA 161 T after each use?

After each use, clean the sawdust from the guide bar and sprocket. Check the chain tension and adjust if necessary. Inspect the chain for any damages, and clean or replace the air filter if needed.

Can I use the Stihl MSA 161 T in wet conditions?

While the Stihl MSA 161 T is designed for outdoor use, it is not waterproof. Avoid using it in heavy rain or wet conditions to prevent electrical issues and ensure user safety.

How do I clean the air filter on the Stihl MSA 161 T?

To clean the air filter, remove the battery and cover. Take out the air filter and gently tap it to remove loose dirt. Wash it in warm soapy water if necessary, then let it dry completely before reinstalling.

What should I do if the chain on my Stihl MSA 161 T keeps coming off?

Check the chain tension and ensure it is properly adjusted. Inspect the guide bar and sprocket for wear or damage, and replace them if needed. Ensure the bar nuts are tightened securely.

How do I replace the chain on my Stihl MSA 161 T?

First, remove the battery and ensure the saw is off. Loosen the bar nuts and remove the sprocket cover. Take off the old chain and replace it with a new one, ensuring it fits correctly in the guide bar. Reattach the sprocket cover and tighten the bar nuts.

Why is my Stihl MSA 161 T cutting slowly?

A slow cutting speed may indicate a dull chain. Sharpen the chain or replace it if necessary. Also, ensure the chain tension is correct and the bar and chain are properly lubricated.