Stihl HSA 45 Instruction Manual
![Stihl HSA 45 manual cover](/images/38157305f0582853d5412ff2/thumbs/thumb175x175.webp)
To charge the Stihl HSA 45, connect the charger to a power outlet, then insert the tool into the charger. The charging indicator will light up, indicating that charging is in progress.
Regularly clean the cutting blades with a soft brush and lubricate them with a suitable resin solvent or lubricant. Check for any loose screws and tighten them if necessary.
Make sure the hedge trimmer is turned off and disconnected from the charger. Use a soft brush to remove debris from the blades, and then apply a resin solvent or lubricant to protect against corrosion.
Ensure that the battery is charged. Check for any blockages in the blades and make sure the safety switch is engaged. If the problem persists, consult the user manual or contact customer support.
The battery of the Stihl HSA 45 typically takes approximately 210 minutes to fully charge.
The Stihl HSA 45 is equipped with an integrated battery that is not user-replaceable. For battery issues, contact Stihl customer service for assistance.
Store the hedge trimmer in a dry, well-ventilated area. Ensure the battery is charged to about 30-60% before storage and check the charge every few months.
Wear appropriate personal protective equipment such as gloves and safety goggles. Ensure the work area is clear of obstacles and bystanders. Always hold the hedge trimmer with both hands during operation.
Check the blades for dullness or damage, and clean them to remove any sap or debris. If necessary, have the blades sharpened or replaced by a professional.
Consult local regulations for electronic waste disposal. Stihl recommends returning the tool to a dealer or recycling center that can handle battery disposal correctly.