Stihl AutoCut 5-2 Instruction Manual

Pages 2

Year 2007

Language(s)

of 2

Stihl AutoCut 5-2 Specification

The Stihl AutoCut 5-2 is a high-performance trimmer head designed for efficiency and ease of use in residential and professional landscaping applications. Engineered to deliver precision cutting, it is compatible with a range of Stihl trimmers, enhancing their versatility and effectiveness. The AutoCut 5-2 features a dual-line cutting system, which ensures balanced trimming and reduces the time required for completing tasks. Its semi-automatic line feed mechanism allows users to advance the cutting line with a simple tap on the ground, ensuring minimal downtime and uninterrupted operation. The trimmer head supports nylon line diameters from 0.08 to 0.10 inches, providing flexibility for various cutting needs. Constructed from durable materials, the AutoCut 5-2 is designed to withstand tough working conditions while maintaining optimal performance. Its compact and lightweight design facilitates easy installation and handling, contributing to reduced operator fatigue. The trimmer head's straightforward maintenance requirements further enhance its appeal, making it a reliable choice for users seeking both performance and convenience. Overall, the Stihl AutoCut 5-2 trimmer head exemplifies robust engineering and user-friendly design, offering an effective solution for maintaining precision in lawn care and landscaping tasks.

Stihl AutoCut 5-2 F.A.Q.

How do I replace the line on the Stihl AutoCut 5-2 trimmer head?

To replace the line, first ensure the trimmer is off and the head is cool. Press the tabs on the sides of the trimmer head to remove the cap. Take out any remaining line, then insert a pre-cut length of line into each eyelet. Wind the line tightly in the direction of the arrow on the spool, then reattach the cap.

What type of cutting line is recommended for the AutoCut 5-2?

It is recommended to use a nylon line with a diameter of 2.0 mm (0.08 inches) for optimal performance with the Stihl AutoCut 5-2 trimmer head.

Why does the line keep breaking on my AutoCut 5-2?

The line may break if it is not the correct size, if it is old and brittle, or if you are using the trimmer too close to hard surfaces. Ensure you're using a 2.0 mm line and avoid contact with rocks or concrete.

How can I prevent the line from welding together inside the AutoCut 5-2 spool?

To prevent line welding, store your trimmer line in a cool, dry place and avoid winding it too tightly on the spool. Using a high-quality line can also reduce the chances of welding.

What should I do if the AutoCut 5-2 head is not advancing the line properly?

If the line does not advance, check for tangles or jams in the spool. Ensure the line is wound in the correct direction and that the spool is not damaged. Clean the head to remove any debris.

Can the AutoCut 5-2 be used with any Stihl trimmer model?

The AutoCut 5-2 is compatible with several Stihl trimmer models. However, it is recommended to check your trimmer's user manual or contact Stihl support to confirm compatibility.

How often should I replace the cutting line on the AutoCut 5-2?

The frequency of replacing the cutting line depends on usage. Regular inspection is advised, and replace the line when it becomes frayed or too short for effective trimming.

What maintenance is required for the AutoCut 5-2 trimmer head?

Regularly clean the trimmer head to remove grass and debris. Check for any signs of wear or damage, and ensure the line is properly wound and the cap is securely attached.

How do I install the AutoCut 5-2 head onto my trimmer?

To install the AutoCut 5-2, first remove any existing trimmer head. Align the AutoCut 5-2 with the drive shaft, then secure it by tightening the nut or bolt according to your trimmer model's instructions.

What should I do if the AutoCut 5-2 head is vibrating excessively during use?

Excessive vibration can be caused by an imbalanced line or debris inside the head. Check that the line is evenly wound and remove any debris. Also, inspect for any damage to the head components.