Siemens EQ6 s100 TE651209GB Quick Start Guide

To descale your Siemens EQ6 s100, fill the water tank with descaling solution and follow the instructions on the display. Make sure you have a container ready to collect the water during the process.
Check if the water tank is filled, the coffee beans are loaded, and the brewing unit is properly inserted. If the problem persists, initiate a cleaning program.
Use the coffee strength button on the control panel to select your preferred strength. The display will indicate the current selection.
Ensure the water tank is properly seated and filled. Clean the water tank sensor if necessary. Restart the machine to reset the error message.
Yes, you can use pre-ground coffee by selecting the appropriate option on the control panel and adding the coffee to the designated compartment.
The brewing unit should be cleaned weekly. Remove it from the machine and rinse under warm water, then let it air dry before reinserting.
Disassemble the milk frother components and clean them after each use. Use the machine's automatic cleaning program for the milk system regularly.
Ensure the machine's temperature setting is at the desired level. Preheat your cup by rinsing it with hot water before brewing.
Access the settings menu on the display and select the factory reset option. Confirm your choice to reset the machine to default settings.
Check for blockages in the grinder and ensure the beans are not too oily. Clean the grinder as per the user manual instructions.