Sempre 93259-01 User Guide

To set the time, press and hold the 'Time Set' button until the display starts flashing. Use the '+' and '-' buttons to adjust the hours and minutes. Press 'Time Set' again to confirm.
Ensure the alarm is activated by checking the alarm icon on the display. Verify the volume setting is not too low. If the issue persists, replace the batteries.
To change the alarm tone, press the 'Alarm Set' button and use the '+' or '-' buttons to cycle through available tones. Press 'Alarm Set' again to save your selection.
Press and hold the 'Mode' button until the time format starts flashing. Use the '+' or '-' buttons to toggle between 12-hour and 24-hour formats, then press 'Mode' again to confirm.
The Sempre 93259-01 Clock requires two AA batteries. Ensure the batteries are inserted correctly according to the polarity indicators in the battery compartment.
Use a soft, dry cloth to gently wipe the exterior of the clock. Avoid using water or cleaning solutions directly on the clock to prevent damage.
Check if the brightness setting is adjustable and increase the brightness if possible. If the issue remains, replace the batteries with fresh ones.
To reset the clock to factory settings, remove the batteries, wait for a few minutes, and then reinsert them. This will clear all settings and restore default configurations.
The snooze function is typically automatic with each alarm. Check the user manual for specific instructions on disabling or modifying snooze settings if available.
First, ensure that the batteries are correctly installed and have sufficient charge. If the problem persists, try using new batteries. If the issue continues, consult the manufacturer for support.