Acctim Abella 15552 Instructions

To set the time, press and hold the 'Set' button until the time digits start to flash. Use the '+' and '-' buttons to adjust the hours and minutes. Press 'Set' again to confirm.
If the display is not clear, check the battery level and replace it if necessary. Ensure the clock is not exposed to extreme temperatures or direct sunlight, which might affect the display.
To change the alarm settings, press the 'Alarm' button to enter alarm mode. Use the '+' and '-' buttons to adjust the time and press 'Alarm' again to confirm the new settings.
First, replace the batteries with fresh ones. If the clock still does not work, check for any obstructions in the battery compartment or contact Acctim customer support for further assistance.
Press the 'Light' button located on the top or side of the clock. The backlight will illuminate the display for a few seconds.
The Acctim Abella 15552 does not feature adjustable brightness settings. The display brightness is fixed to ensure optimal readability.
It is recommended to replace the batteries every 12 months or when the display begins to dim to ensure accurate timekeeping.
The Acctim Abella 15552 requires two AA batteries. Use high-quality alkaline batteries for the best performance.
To reset the clock, remove the batteries, wait for 10 seconds, and then reinsert them. This will clear all settings and restore the clock to its default state.
No, the Acctim Abella 15552 is not water-resistant. Keep it away from water and high humidity environments to prevent damage.