Acctim Aldbury 22705 Operating Instructions
![Acctim Aldbury 22705 manual cover](/images/39cec985119b089df1950cb2/thumbs/thumb175x175.webp)
To set the time on the Acctim Aldbury 22705, press and hold the time set button until the current time flashes. Use the hour and minute buttons to adjust the time, then release the time set button to save.
If the clock stops working, check the battery compartment to ensure the batteries are properly installed and have charge. Replace the batteries if necessary and ensure they are inserted with the correct polarity.
To change the batteries, remove the clock from its stand, open the battery compartment on the back, and replace the old batteries with new ones. Ensure the correct polarity is observed.
The Acctim Aldbury 22705 does not have an adjustable brightness feature. The display is designed to be visible under most lighting conditions.
To set an alarm, press the alarm set button and hold until the alarm time flashes. Use the hour and minute buttons to set the desired time, then release the alarm set button to save the setting.
Ensure the alarm is turned on and the volume is set to an audible level. Check the battery level as low power might affect the alarm function.
The Acctim Aldbury 22705 is designed for indoor use only. Exposure to outdoor elements may damage the clock.
Use a soft, dry cloth to clean the surface of the clock. Avoid using water or cleaning agents as they may damage the clock's finish.
If the clock is running slow, replace the batteries with new ones and ensure they are installed correctly. A battery with low charge can cause the clock to run slowly.
To reset the Acctim Aldbury 22705, remove the batteries and wait for a few minutes before reinserting them. This will reset the clock to its default settings.