Pyle PRMC100 Operation Manual

To load bills into the PRMC100, first ensure the machine is turned on. Open the hopper and place the stack of bills in the center. Align the bills properly to avoid jams and ensure the guides are adjusted to fit the size of the bills.
If the machine jams, turn off the power immediately. Open the machine cover and gently remove any stuck bills. Check for any visible obstructions and remove them. Once cleared, close the cover and restart the machine.
To clean the machine, first turn it off and unplug it. Use a soft, dry cloth to wipe the exterior. For internal parts, use a can of compressed air to blow out dust and debris. Avoid using liquid cleaners inside the machine.
If the machine is not counting accurately, ensure the bills are properly aligned in the hopper. Check the sensors for dust or debris and clean them gently. Also, ensure that the machine is on a stable surface and not vibrating during operation.
To perform a software reset, turn off the machine and unplug it for about 30 seconds. Plug it back in and turn it on while holding down the reset button located at the back of the machine. Release the button once the machine initializes.
Yes, the PRMC100 is equipped with UV and MG sensors to help detect counterfeit bills. Ensure that these features are activated by checking the settings in the machine’s menu.
To maintain optimal performance, clean the machine every week if used regularly. Inspect the sensors and rollers monthly for wear and tear. Have the machine professionally serviced annually to ensure all components are functioning correctly.
To change the counting mode, press the 'Mode' button on the control panel. Use the navigation buttons to scroll through available modes such as batch, add, and auto. Select the desired mode by pressing the 'Enter' button.
Refer to the user manual for specific error code meanings. Common solutions include checking for jammed bills, cleaning the sensors, and ensuring the machine is on a stable surface. If the problem persists, contact customer support.
The PRMC100 is primarily designed for a specific currency type. However, it can handle other currencies of similar size and thickness, but accuracy in denomination identification might not be guaranteed.