Poulan Pro Twist-N-Edge TE 450 LE Operator's Manual
![Poulan Pro Twist-N-Edge TE 450 LE Trimmer manual cover](/images/AkFXtItCujdifBjekxuQHLFC/thumbs/thumb175x175.webp)
To start the trimmer, ensure the unit is on a flat surface, set the choke to the full position, press the primer bulb 6 times, pull the starter rope sharply until the engine starts, then move the choke lever to the run position.
Use a 40:1 ratio of unleaded gasoline to 2-cycle oil. Make sure to use fresh fuel and mix it thoroughly before filling the tank.
To replace the trimmer line, remove the spool from the trimmer head, cut two lengths of line, insert them into the holes in the spool, wind the lines evenly and tightly, then reattach the spool to the trimmer head.
Ensure you are using the correct line diameter, avoid hitting hard surfaces, and check for any obstructions in the trimmer head that might cause line breakage.
Regularly clean the air filter, use fresh fuel, replace the spark plug annually, and check for any debris or blockages in the trimmer head.
Check the air filter for dirt, clean or replace as necessary, ensure the fuel is fresh and mixed correctly, and inspect the spark plug for wear or damage.
Perform regular maintenance every 25 hours of use or at the beginning of each season. This includes cleaning the air filter, inspecting the spark plug, and checking the trimmer line.
Yes, you can use different brand trimmer lines as long as they match the recommended diameter and type specified in the user manual.
Inspect the trimmer head for balanced line, ensure the shaft is not bent, and check that all screws and connections are tightened securely.
Drain the fuel tank, clean the trimmer thoroughly, inspect for any needed repairs, and store it in a dry, cool place away from direct sunlight.